Alpes USA MP615/MP107 manual Language capacity, Sub-scripts, File SC00, Video player, Commands

5.2 Language capacity

5.2.1 sub-scripts.

The player allows up to 10 linked sub-scripts to be called up.

Example:

In the file SC00:

Play /clips/file.mpg

SC01

5.2.2 Video player

Because of the FAT32 system, the maximum size for one single video file is 4 Go.

5.2.3 Commands

The video output and format commands are:

Colour video system:

F0 = NTSC

F1= PAL

F2= PAL 60 Hz

Outputs:

F4= Comp -Y/C

F5= YUV

F6= RGsB

F7= SVGA (Format: 720x575 - 37.5Khz 70Hz)

Therefore, to be operated externally, a command like the one shown below should exist in the script:

10: F1	(the command in RS232 will be called up by using the following formula:
	ID0CDE:KEY10)

Attention:

If your files were encoded in PAL format in 50Hz (25 images/s), you must imperatively set the player to "F1" on the first line of the reading script.

If your files were encoded in NTSC format in 60Hz (30 images/s), you must imperatively set the player to "F0" on the first line of the reading script.

Rev 1.5 Page 12