3.2 Video and audio settings 17
To configure the video and au- dio settings, select the System
Setting > A/V Output Setting
menu.
3.2.1 Televsion standard
The digital receiver supports two types of television standard. One is PAL standard, and the other is NTSC standard. PAL was adopted in European countries while NTSC is adopted in USA, Canada, Mexico and so forth.
If you have a PAL televsion, you have to set the TV Type op- tion to PAL. In this case, if a service is broadcasted in NTSC standard, the digital receiver converts it into PAL standard for your PAL television. However, its quality would somewhat fall. The opposite case brings about the same result.
The best thing is to watch PAL services with a PAL television and to watch NTSC services with a NTSC television. How- ever, the multi television set is able to process both of them. So if you have an multi television set, set the TV Type op- tion to Multi. With this option, the digital receiver will output them without standard conversion. This setting is most rec- ommended especially if you are not sure what stadard televi- sion you have.
3.2.2 Color model
The type of the socket that reads TV on the back panel of the digital receiver is SCART. This is also known as Euro-