2.4 Connecting up your digital receiver 11
To use the composite video connector
You will need to obtain a composite video cable (RCA cable) to use the composite video connector. Plug one end of the cable into the VIDEO (yellow) socket on the digital receiver, and the other end into the matching socket on your television.
To connect the audio connectors
You will need to obtain an audio cable (RCA cable) to connect the audio connectors. Plug one end of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digital re- ceiver, and the other end into the matching sockets on your television or audio system.
To use the RF connector
If your television does not have any video and audio input, you will need to use the radio frequency output from the digital receiver.
In this case, you will need to connect a ca- ble from the RF OUT socket to the antenna connector on your television. To ensure your television can also pick up existing analogue channels as well, you will need to connect a cable from your television antenna to the RF IN connector.
Tune your television set to channel 36 (or rarely 43) so that you can see the output from the digital receiver.