Using External Sources

USING THE INTEGRATED GAME SYSTEM

There are integrated video games built into the system. The Rosen Game Controller is included.

Flashing Light

To play a game:

Set the A/Off/B switch to A or B to turn the game controller on.

Press SOURCE on the remote or MODE on the front control panel until “INTERNAL GAME” appears, along with the game startup menu.

Battery Indicator: A red light will flash when the buttons are pressed indicating the batteries are ok.

Set the controller to channel A or B depending on which headrest unit you will be using.

Use the left and right arrows on the controller to select which game you want to play from the list.

Press START on the controller, to begin a game.

While playing, use A and/or B as fire, jump, or other action buttons, depending on the game.

To return to the game main menu, press RESET on the controller.

Note: The controller works using infrared “line-of-sight” technolo- gy. If the controller is held so that there is not a clear line of sight to the system, intermittent operation or reset will result.

You may use optional external video games, camcorders, and other portable video units by connecting the unit to the auxiliary RCA input jacks on the side of the unit.

Aux A/V Input (Side of the unit)

To use an external game system, a 12VDC to 110VAC power inverter,

available at most electronic retail stores, is often required.

Note: If you want to watch non-widescreen, 4:3 images, press the DISPLAY button on the remote control until “STANDARD” is displayed on the screen. This will properly size the image, instead of stretching the image across the wide screen. In “STANDARD” mode, you will see black bars on the sides of the image.