4.1 Searching broadcasting services 35
6.Specify the packet identifiers of your desired service at the PID option with the numeric buttons. A packet iden- tifier is used to verify audio and video streams.
Searching every service of SMATV system
To search every service of a SMATV system, if the digital re- ceiver is connected to it, perform the following steps:
1.Choose your desired satellite at the Satellite Name op- tion.
2.Set the Search Mode option to SMATV.
3.Choose your desired transponder at the Frequency op- tion or enter it with the numeric buttons.
4.Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.
5.Set the Polarization option to the polarization of your desired transponder.
You can search pay services as well as free services as follows:
•To search only free services, set the FTA/Scrambled option to FTA only.
•To search only pay services, set it to CAS only.
•To search both free services and pay services, set it to FTA
+CAS.
To start service search, select the Start Search item; then a list box appears, in which found services will be listed. When it has completed, press the button to save found services .
OK
To stop at any time or to exit without saving, press the EXIT button.