Topfield TF 5100 PVR manual Local time setting, Radio frequency output

22 Preference Settings

enjoy only one source or both of them in either stereo or mono. Set the Sound Mode option as you desire.

Apart from this setting, you can change the sound mode with the button. See § 5.2.3 for detailed description.

3.2.6 Radio frequency output

If you have connected your television to the RF OUT socket, you should configure the radio frequency output. The digital receiver can make the analog television from the digital tele- vision and output it through the RF OUT socket.

Set the RF Output option to the television standard that your country supports referring to Table 3.1.

Table 3.1: Television standards by country

Signal type	Country
PAL G	Australia, Austria, Cyprus, Czech Republic, Egypt, Estonia, Finland, Ger-
	many, Greece, Iceland, Iran, Israel, Italy, Kuwait, Latvia, Libya, Lithuania,
	Luxembourg, Netherlands, New Zealand, Norway, Portugal, Slovakia, Slove-
	nia, Spain, Sweden, Switzerland, Syria, Yugoslavia
PAL I	Hong Kong, Macao, Republic of Ireland, South Africa, United Kingdom
PAL K	Czech Republic, Hungary, Poland
NTSC M	Bahamas, Belgium, Bolivia, Chile, Ecuador, Fiji, Guam, Jamaica, Mexico,
	Panama, Peru, United States, Venezuela
	Set the RF Channel option to a channel number as you de-
	sire. You have to tune your television to the channel set to this
	option to watch television.
	If you have connected your analog television antenna to the
	RF IN, you can watch analog broadcasts via the digital re-
	ceiver.

3.3Local time setting

You should set your local time for timer events.