3M 200a manual Could result, Box Drive Belt Tension Adjustment Machine Bed Infeed End

Page 25

Adjustments (Continued)

WARNING – Turn off electrical power supply and disconnect power cord from electrical supply before beginning adjustments. If power cord is not disconnected, severe injury to personnel

could result.

Refer to Figure 5-2 and adjust belt tension as follows:

1.Remove and retain center plate and four screws.

2.Loosen, but do not remove, M10 lock nut with a 17 mm open end wrench.

3.Reset the tension on the drive belt as needed. Use M6 hex wrench and adjust the M8 socket head tension screws in (clockwise) to increase tension or out (counterclockwise) to decrease tension. Tighten lock nut to secure tension setting.

4.Replace center plate and secure with original screws.

Figure 5-2 – Box Drive Belt Tension Adjustment (Machine Bed Infeed End)

20

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 3M Packaging Systems Division AccuGlideTMTo Our Customers Replacement Parts and Additional ManualsTo Our Customers Table of Contents Section II AccuGlide II STD 2 Inch Taping Heads Description Contents 200a Adjustable Case Sealer Knife Warning Label Important SafeguardsStop Label Safety Instructions label, shown Up/Down/Lock Label Specifications Tape Roll Diameter Box Weight and Size CapacitiesTape Application Leg Length Standard Tape Application Leg Length OptionalSet-Up Recommendations Machine Dimensions MinimumReceiving And Handling Installation and Set-UpUncrated 200a Frame Set-UpMachine BED Height BOX Size Capacity of Case Sealer 200a Case Sealer Components Left Front View OperationTape Loading/Threading Emergency Stop SwitchUpper Taping Head Box Size Set-UpBox Sealing Will occurLubrication MaintenanceBox Drive Belt Replacement Knife Replacement, Taping HeadPersonnel could result Circuit Breaker Could result Box Drive Belt Tension AdjustmentsCould result Box Drive Belt Tension Adjustment Machine Bed Infeed EndAdjustments This page is Blank Personnel could result Changing the Tape Leg Length Special Set-Up ProcedureBox and Machine Bed Height Range Refer to Figure To personnel could resultBox and Machine Bed Height Range This page is Blank Troubleshooting Guide Problem Cause Correction TroubleshootingPage Electrical Diagrams Electrical Diagrams Replacement Parts Ordering Information and Service Replacement Parts and Service InformationSpare Parts Tool KitPart Number Option/Accessory Options/AccessoriesTo Order Parts Replacement Parts Illustrations and Parts ListsThis page is Blank 200a Adjustable Case Sealer Frame Assemblies 200a Adjustable Case Sealer Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description Page Ref. No 3M Part No Description 200a Adjustable Case Sealer Ref. No 3M Part No Description Safety and Information Labels Ref. No 3M Part No Description Qty Safety and Information Labels
Related manuals
Manual 62 pages 54.72 Kb

200a specifications

The 3M 200A is a versatile and high-performance air filtration product designed to enhance indoor air quality across various environments. Renowned for its effectiveness and efficiency, the 3M 200A employs cutting-edge technologies and features that cater to both residential and commercial applications.

One of the main features of the 3M 200A is its advanced filtration system. The product utilizes a HEPA (High-Efficiency Particulate Air) filter, which is capable of capturing up to 99.97% of airborne particles as small as 0.3 microns. This includes dust, pollen, mold spores, and pet dander, making it an ideal choice for allergy sufferers and those concerned about air quality. Additionally, the filter is designed to last longer than traditional filters, reducing the frequency of replacements and minimizing waste.

The 3M 200A also incorporates innovative technologies such as the Microforce filtration technology. This proprietary technology enhances the efficiency of particle capture while maintaining optimal airflow. By maximizing filter performance, the Microforce technology not only improves air quality but also reduces energy consumption, making the unit environmentally friendly.

Another significant characteristic of the 3M 200A is its user-friendly design. The product features a sleek and modern aesthetic that allows it to seamlessly blend into various interior styles. Its intuitive control panel ensures ease of use, allowing users to adjust settings with just a few taps. Furthermore, the 3M 200A is equipped with real-time air quality monitoring, providing users with valuable insights into their indoor environment.

In terms of performance, the 3M 200A operates quietly, ensuring minimal disruption during use. This feature is particularly beneficial in settings like bedrooms, offices, and hospitals, where peaceful environments are essential. Its compact size also makes it easy to position the unit in various spaces without sacrificing performance.

Overall, the 3M 200A stands out as a remarkable solution for improving indoor air quality. With its advanced filtration capabilities, innovative technologies, user-friendly design, and quiet operation, it is a reliable choice for anyone looking to breathe easier and maintain a healthier living environment. Whether used at home or in commercial settings, the 3M 200A is built to deliver optimal air purification, ensuring peace of mind for its users.
Top Page Image Contents