Operating the TEV-501, Switching the TEV-501 on/off

OPERATING THE TEV-501

➮Repeat this procedure for the passenger seat.

➮Open the case’s upper lid.

➮Flip up the monitor.

➮Open the zip fasteners at the front

of the case. The unit is angled at around 15°. Close the zip fasteners until the unit is set at an angle that you find convenient.

Operating the TEV-501 in buildings

➮Place the unit on a secure and level surface.

➮Open the lower storage compartment in the TEV-501’s case, and remove the power supply unit.

➮Connect the output of the power supply unit to the DC 12V input of the TEV-501.

➮Connect the mains power cable to a 220-volt socket.

Operating the TEV-501

Switching the TEV-501 on/off

➮Press the POWER button to switch the TEV-501 on/off.

Playing a video cassette

Note

The TEV-501 is designed to play standard consumer video cassettes of the VHS variety (Video Home System). Never try inserting other cassettes other than VHS cassettes into the TEV-501. Suitable VHS video cassettes are labelled with the VHS symbol. Blau- punkt-Werke cannot accept any liability for damage that may occur from using other video cassettes in this unit.

Inserting a video cassette

➮Carefully insert a video cassette with its printed side uppermost and its flap side first into the cassette compartment of the TEV-501.

Removing a video cassette

➮With playback stopped, press the STOP/EJECT button.

Playing a video cassette

➮To begin playback, press the PLAY button.

Note

Video cassettes will be played automatically if their recording protection mechanism has been activated.