Sylvania DVC860D Hints for Timer, To Stop AN Automatic Timer PRO- Gram Already Started

PROGRAM NUMBER 4

ONCE DAILY WEEKLY

ONE TIME PROGRAM

PROGRAM NUMBER 4

DATE - - / - - START TIME - - : - - - -

END TIME - - : - - - -

CHANNEL - -

REC SPEED - -

ONE TIME PROGRAM

PROGRAM NUMBER 4

DATE 05 /12 MON

START TIME - - : - - - -

END TIME - - : - - - -

CHANNEL - -

REC SPEED - -

2) Set the frequency of the recording

For once: Press K or L to point to "ONCE".

For daily (Monday~Friday): Press K or L to point to "DAILY".

For weekly: Press K or L to point to "WEEKLY".

Then, press B.

3) Set the date

First, press K or L for the month.

Then, press B. Next, press K or

Lfor the day. Then, press B.

4) Set the start time

First, press K or L for the hour. Then, press B. Next, press K or L

for the minute. Then, press B. And

then, press K or L for AM or PM. Then, press B.

5) Set the end time	ONE TIME PROGRAM
	PROGRAM NUMBER 4
Follow the instructions of	DATE		05 /12 MON
	START TIME 07: 30 PM
"Set the start time" to set	END	TIME - - : - - - -
	CHANNEL		- -
	REC SPEED		- -
the end time.
6) Set the channel number	ONE TIME PROGRAM
	PROGRAM NUMBER 4
	DATE		05 /12 MON
Press K or L repeatedly for the	START TIME 07: 30 PM
	END	TIME 08: 30 PM
desired channel number. Then,	CHANNEL		- -
	REC SPEED		- -

press B.

If you connected the DVD/VCR COMBINATION UNIT to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 13, select the DVD/VCR to channel 3 or 4 the same channel as RF output channel of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box.

Leave the cable box or satellite box on for timer recording.

7) Set the tape speed	ONE TIME PROGRAM
	PROGRAM NUMBER 4
Press K or L repeatedly for the	DATE	05 /12 MON
	START TIME 07: 30 PM
desired tape speed. Then, press B.	END TIME 08: 30 PM
	CHANNEL	16
	REC SPEED SP

SP

SLP

¡If a tape ends during TIMER RECORDING, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER REC light blinks. (If the DVD power is off, the VCR will become STANDBY status).

¡If a tape is not in the VCR or does not have a safety tab, the TIMER REC light flashes and timer recording will not operate. Please insert a recordable tape.

¡When all timer recordings are finished, the TIMER REC light will flash. To use the VCR again as usual, press T-SET to disable the flashing TIMER REC light, then press VCR/TV to select the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

¡When timer recordings are set, the TIMER REC light will come on. To use the VCR as usual until the time for the recording, press T-SET so that TIMER REC light disappears. Press VCR/TV to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

If you want to use the DVD player during a VCR timer recording or while the TIMER REC light is on or flashes.

¡You can use the DVD player while the TIMER REC light is on or flashes, or during a timer recording. Press POWER to turn on the DVD. Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this man- ual. You don’t have to set the TIMER off to use the DVD only.

TO STOP AN AUTOMATIC TIMER PRO- GRAM ALREADY STARTED

Press STOP/EJECT on the DVD /VCR COMBINA-

TION UNIT.

TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM

1Press T-SET.

¡If the DVD output mode is selected, you have to switch it to the VCR mode by pressing the VCR on the remote control or the OUTPUT on the VCR.

		2	Select main menu by pressing MENU.
5 To set another program, repeat step [4]. To
		3	Select "TIMER PROGRAMMING" by press-
exit, press CLEAR/C.RESET.
			ing K or L. Then, press B.
6 Press T-SET to set the timer.
		4	Select the program number you want to
¡The TIMER REC light on the DVD/VCR COMBI-
			check by pressing K or L.
NATION UNIT comes on. TIMER RECORDING
		¡The details of the selected program appears on the
WILL NOT BE ACTIVATED UNLESS YOU		TV screen.
PRESS T-SET.
		¡Go to the digit you want to change by pressing B or
		s. Then, enter correct numbers by pressing oor p.
HINTS FOR TIMER
		¡You may cancel the entire program by pressing s
RECORDING
		while the program number flashes.
	VCR	5	Press CLEAR/C.RESET to exit.
¡If there is a power failure or the VCR is unplugged
for more than 30 seconds, the clock setting and all		6	Press T-SET to return to timer stand-by mode.
timer settings will be lost.
	– 20 –		EN

1L25