OMPDV70X.book Page 11 Sunday, May 28, 2006 8:45 PM
Playing Audio CDs
2.Press
The section will begin repeating and will continue until you press
Programming Playback Sequence
The PROGRAM button brings up the Program menu, which allows you to program playback sequence. There are 16 slots available.
To program playback sequence:
1.Press PROGRAM to bring up the Program menu.
2.Select the first slot using the arrow controls, and enter the desired track number using the keypad.
3.Proceed in the same manner through the next slots until the whole sequence is programmed.
PROG |
|
|
|
|
|
|
| |
1 | [ – – ] | 5 | [ – – ] | 9 | [ – – ] | 1 3 | [ – – ] | |
2 | [ – – ] | 6 | [ – – ] | 1 0 | [ – – ] | 1 4 | [ – – ] | |
3 | [ – – ] | 7 | [ – – ] | 1 1 | [ – – ] | 1 5 | [ – – ] | |
4 | [ – – ] | 8 | [ – – ] | 1 2 | [ – – ] | 1 6 | [ – – ] | |
|
|
| P LAY | CL EAR |
|
|
4.Select “PLAY” using the arrow controls and then press to begin playing back the sequence.
Select “CLEAR” and press to clear the playback sequence and start over.
11