Getting Started, Video Connection, Audio Connection

Getting Started

Video Connection

Video Output

Connect the DVD player’s video output (RCA connec- tor or S-Video) on the rear panel to the TV’s video input (or other devices) using AV, S-Video or

Component.

Note:

Certain output formats may not be available on all models. Please check product outer box for available.

YELLOW

S-Video Output

If your display device supports S-Video terminal, you can also connect your display device to DVD player’s S-Video Output connector on the rear panel.

Rear of TV set

	S-video cord	S-videoinput
	(not supplied)	S-videoinput
	(not supplied)	terminal (S1, S2)
		terminal (S1, S2)
	To S-video terminal

V C R

	X	T V
	X
	CD / DVD	Connect
	PLAYER	Connect
	PLAYER	directly
		directly

Notes:

1.Refer to the instructions supplied with the component to

be connected.

2.Do not connect this player to a video deck. If you do,

noise may appear in the picture.

Audio Connection

Stereo Configuration

Connect your TV stereo audio inputs (L for left chan- nel and R for right channel) to the DVD player’s ste- reo audio output L and R respectively.

Analog 2 Channel Output

For your convenience and cost concern, DVD-Player supports Dolby 2 Channel audio output directly. However, you still need to connect the 2 Channel audio output to your audio amplifier relatively as following.

Note:

When you connect the DVD player to another device, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.

White Red

White

Red