JVC LYT1942-001A manual Troubleshooting, Action

Troubleshooting

	Trouble
	Cannot turn the
	power on.
	Cannot function
	properly.
General
	The burner or AC
	adapter is hot.
	The power lamp
	blinks slowly in red
	while using the
	burner.
	The burner is not
	recognized by the
	Everio camera.
	The burner is not
	recognized by the PC.
	Writing fails.
Copy
	Cannot open the disc
	tray.
	Unable to write/read
	data at the maximum
	speed (when
	connected to a PC)

Action

zMake sure the AC adapter and power cord are properly connected. (P. 4)

zPress the power button on this burner for more than 5 seconds to reset the burner. (The burner will turn off automatically.)

zThe burner and AC adapter will become hot with prolonged use. This is not a malfunction.

zIf the burner is abnormally hot, remove the AC adapter and consult the dealer from which the burner is purchased.

zThe burner cannot function properly due to a drop in its interior temperature. Wait until the power lamp stops blinking.

zThere is a rise in the burner’s interior temperature. Turn off the burner, wait for a while then turn on again.

zMake sure the USB cable is connected properly. Insert the connector with the protrusion to the burner, and the other end to the Everio camera. (P. 14)

zMake sure the USB cable provided with the Everio camera is connected properly. (P. 16)

zUse discs recommended for the burner. (P. 48) zInsert the disc with the label facing up.

zWipe off any dirt that is found on the tray.

zUse discs for which the writing surface is not damaged.

zDo not use deformed discs.

zIf disc writing is currently in progress, the disc tray cannot be opened. Wait till the writing process ends.

zIf the disc cannot be properly ejected after the burner is dropped or due to other malfunctions, insert a thin rod into the force eject hole to eject the disc. (P. 44)

zUse the recommended discs. (P. 48)

EN

ES

41