Recording Options | 28 |
|
SEARCHING FOR CHANNELS
Before you can record TV programs, you must first scan for channels.
1.In STOP mode, press SETUP to access the Setup menu.
2.Use the RIGHT/LEFT keys to highlight the TUNER icon, then press ENTER.
3.Press ENTER then use the UP/DOWN arrow keys to select your input source: Air (Antenna) or Cable, Press ENTER again to confirm.
4.Use the RIGHT/LEFT arrow keys to highlight SCAN, then press ENTER. The recorder will automatically
search for all available channels. If a channel cannot be found, it
will be checked in the Skip column. To cancel automatic channel search,
press STOP.
5.To browse the stored channels, use the RIGHT/LEFT arrow keys to move to CH column, then use the UP/DOWN arrow keys to select channels.
You can also use the 0-9 keys to select channels directly.
6.To add or delete channels use the RIGHT/LEFT arrow keys to move to the Skip column, then use the UP/DOWN arrow keys to highlight the desired channel. Press ENTER to add or remove the check mark.
7.Press SETUP again to exit.
NOTE:
Cable channel numbers are 1-125.
Air (Antenna) channel numbers are 2-69.
SETUP
ARROW KEYS
OPEN/CLOSE | SETUP | DISPLAY | POWER |
| |||
|
|
| MENU |
|
|
| TITLE |
|
|
| SUBTITLE |
RANDOM |
| GO TO | AUDIO |
PREV. | NEXT | PLAY | PAUSE |
REW | F F | SLOW | STOP/RETURN |
ENTER
ENTER