Timei shiftingi ti & Savingi

Daewoo DH-6100P user manual Timei shiftingi ti & Savingi, Time shifting in HDD mode

DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘ ` 39 mac001 1200DPI 100LPI

Time shifting in HDD mode

When the HDD/DVD Recorder is turned on or you press the [HDD] button on the remote control or the [DVD/HDD] button on the front panel to move to HDD mode from other menus, the last viewed TV channel will be tuned in and Time shifting starts automatically. Time shifting allows ‘pausing’ the live TV broadcast for up to 60 minutes. At any time, the viewing can resume. Press [PLAY/PAUSE] to pause the broadcast, press [PLAY/PAUSE] again to resume TV viewing. If the system is paused for 60 minutes, it will automatically resume TV viewing.

12 : 34

13 : 34

Ã LIVE

Press [STOP] to return to the live broadcast.

Navigation in Time Shifting mode

You can navigate in Time shifting mode and control the output by using the following remote control keys:

Changes the channel

Fast Forward. Press to cycle through 2, 4, 8, 16, 32X speeds.

Fast Rewind. Press to cycle through 4, 8, 16, 32X speeds.

Slow forward/reverse. Press to cycle through 1/2, 1/4 or 1/8 speeds.

Jumps back to the 'jump to interval' time is set in the setup menu.

Jumps forward to the 'jump to interval' time is set in the setup menu. Refer to page 30.

If you are using the default value of “Setup –> Preferences –> Hard Disk –> Buffer mode –> Refresh”, and change Channels, the Time shifting buffer data will be lost. No message will be provided prior to doing so. However, if you set “Setup –> Preferences –> Hard Disk –> Buffer mode –> Preserve”, and change Channels, the Time shifting buffer data will be maintained.

During Time shifting, a Timer recording may come up. As you cannot watch one program in Time shifting and record another channel, the HDD/DVD Recorder will prompt you to confirm if you want to keep the current channel or proceed with Timer recording. If there is no response, this combination assumes Timer recording should be started. The message will appear 5 seconds before the TImer recording is due.

Time shifting is stored in a buffer that contains 60 minutes of recording. After 60 minutes, the buffer will be progressively overwritten. If you need to keep the video contained in this buffer for future

usage, you can Save all or part of the buffer.	PLAYBACK