Swann SW242-2LP user manual Installation, Installing Hard Drive, Connecting Camera and Monitor

Page 6

User Manual

Chapter3: Installation

1.Unplug the power supply. Don’t install or uninstall HDD when DVR is on.

2.Remove the DVR cover carefully.

3.Connect the power cord and data cable to HDD.

4.Use the provided screws to fix hard drive on the rack, and then replace the

cover.

There are 4 camera inputs and 1 video output with BNC connectors (Refer to

2.2 Rear Panel).

Please only use the power adapter supplied with the DVR. The standard power supplied to the DVR is DC 12 Volt, 3.0 Amp.

- 3 -

Image 6

Contents DVR4-1150 Table of Contents Specifications Appendix RecordingPlayback USB Programming DVR Features OverviewFront Panel Remote Control Rear PanelConnecting Camera and Monitor InstallationInstalling Hard Drive Connecting the Power SupplyRestore Recording Feature Detecting Installed Hard DriveRecovering Lost Data Starting the DVRDVR Setup Setup MenuMain Screen Camera Select Record SelectResolution Record FrameRecord Quality Schedule SetMiscellaneous Menu-Auto Record Miscellaneous Menu- Change PasswordMiscellaneous Menu-Language Select Miscellaneous Menu-Color SetMiscellaneous Menu-Time Set Hard Disk SetVideo Mode Motion SetFactory Reset RecordingStart Recording Stop Recording Recording Time on Hard DrivePlayback Search TimeUSB Programming PC Viewer ProgramProgram buttons PC Backup RemarkSpecifications DescriptionDVR AppendixSW242-2LP