Rotel RDV-1040 AC Input, Installing the Batteries, Precautions for the safe use of batteries

Page 9

Connecting the Power Cord

AC Input

Your RDV-1040 is configured at the factory for the proper AC line voltage in the country where you purchased it (USA: 115 volts/60Hz AC or CE: 230 volts/50Hz AC). The AC line con- figuration is noted on a decal on the back of your unit.

After all the audio/video connections have been made, plug the supplied power cord into the AC INPUT receptacle on the back of the unit. Then insert the power plug into an AC wall outlet. The STANDBY indicator lights and setup is complete. Note that a small amount of power (3 watts) is always used while the power cord is connected to the wall outlet.

Observe the following precautions:

•Do not connect or disconnect the power cord with wet hands.

•Disconnect the power cord if you are not going to use the unit for a long time.

•When unplugging the player from the wall outlet, always pull the plug, not the power cord.

•Disconnect the power cord before cleaning the unit.

•Disconnect the power cord before moving the unit.

•Do not damage, alter, twist or pull the power cord. This may damage the cord and cause fire, electric shock, or other accidents. Con- tact your authorized Rotel dealer and get a new power cord if the cord is damaged.

•Do not put anything heavy, on the unit, or the power cord, as this may cause fire, elec- tric shock, or other accidents.

RR-DV96 Remote Control

Installing the Batteries

The battery compartment is located on the back of the remote control unit.

1Press down on the

point shown by the arrow at the top of the com- partment cover, and pull up the cover.

9

2Place two R6P (SUM-3)/

AA(15F) batteries in the re- mote control according to the polarity markings (“+” and “–”) inside the com- partment and on the bat- teries.

3 Place the cover over the com- partment, and press down lightly.

The batteries will last

about six months with normal use. If the func- tions of the remote control become erratic, re- place the batteries.

Precautions for the safe use of batteries

Observe the following precautions for the safe use of batteries. If they are used improperly their life will be shortened, they may burst or their contents may leak.

•Remove the batteries from the remote con- trol if it will not be used for a long period of time.

•Remove dead batteries and dispose of them properly.

•Never leave dead batteries lying around. Do not take them apart, mix them with other refuse, or throw them into an incinerator.

•Never touch liquid that has leaked out of a battery.

•Do not mix new and old batteries, or bat- teries of different types, when replacing them.

Programming the RR-DV96 Remote to Control a TV

After it is programmed the RR-DV96 can op- erate your TV set.

1 Set the TV/DVD switch 1 to TV.

2Press and hold down the TV/VIDEO-CAN- CEL 22 button. Then enter the manufac- turer code of your TV listed in the following

table using the numeric buttons (0 - 9) 4 . Do not release TV/VIDEO-CANCEL. button until the next step is completed. (Example: To enter code “01” press and release the “0” button, then press and release the “1” button.

3 Press the ENTER 34 button, then release the TV/VIDEO-CANCEL button.

English

4Test the program setting by pressing the TV POWER 17 button to see if it turns your set on. If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.

Manufacturer

No.

 

Manufacturer

No.

Aiwa

36

 

NEC

20

Beijing

22

 

Noblex

22

CCE

02

 

Nokia

31

Changhong

34

 

Panasonic

04, 11

Daewoo

17, 37

 

Peony

34, 38,

Ferguson

27

 

 

39

Finlux

30

 

Philco

10, 17,

Funai

32

 

 

21

Gradiente

15, 20

 

Philips

02

Grundig

19

 

RCA

05

Hitachi

10

 

Samsung

12, 33,

ITT

28

 

 

34, 35

Jinxing

38

 

Sanyo

13, 16

JVC

01, 23,

 

Sears

13

 

24, 25

 

Sharp

06

Konka

40

 

Sony

07

LG (Goldstar) 18

 

TCL

41

Magnavox

02

 

Thomson

26

Mitsubishi

03

 

Toshiba

08, 14

Mivar

29

 

Zenith

09

Remote Control TV Operation

When the TV/DVD switch 1 is in the TV po- sition the following buttons can be used to con- trol the TV.

TV POWER 17

Turns the TV on or off.

CH+ and CH – 31 13

Changes the TV channels.

VOL+ and VOL – 32 12

Adjusts the TV volume.

TV/VIDEO button 22

Switches the TV input between TV and Video.

0 - 10 and (Numeric Buttons) 4

Selects the TV channels. Note: For some TVs, pressing “+10” functions as the “+100”. The “10” button functions as ENTER if your TV re- quires pressing the ENTER after selecting a channel number.

MUTING button 21

Mutes the TV sound.

External Remote In

The 3.5mm mini-jack (labeled EXT REM IN) re- ceives command signals from an industry stan- dard infrared receiver. This feature is useful when the unit is installed in a cabinet and the front panel sensor is blocked. Consult your au- thorized Rotel dealer for information on ex- ternal receivers and the proper wiring of a jack to fit the mini-jack receptacle.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RDV-1040 Important Safety Instructions Important for Laser ProductsClass 1 Laser Product Volume -/CURSOR Button TV/DVD switchInfrared signal output window DVD Power button TV Power buttonDisplay Window Progressive indicatorRemote sensor Play buttonContents Placement PrecautionsNTSC/PAL Output Signal Selector Switch Remote/480p/480i Output Signal Selector SwitchComposite Input TV Connection Component Input TV ConnectionChannels of the RDV-1040 to the single input Connecting to an Audio Amplifier or Receiver Connecting to Audio Equipment with a Digital InputOptical Connection Coaxial ConnectionPrecautions for the safe use of batteries Installing the BatteriesRemote Control TV Operation AC InputDVD Video Disc Region Codes Playable DiscsUnplayable Discs Digital Audio FormatsRecalling the DVD Player SET UP menu Initial SetupGetting Started Turning On the RDV-1040Resuming Playback Basic Disc PlayTo Rapidly Advance or Reverse Playback To Resume Playback5x Quick Playback With Sound To Advance a Still Picture Frame by FrameLocating a Scene From the DVD Menu Using the Numeric ButtonsLocating a Scene From the Menu of a SVCD/Video CD with PBC Specifying a TitleTo Play Tracks in Random Order Random Play Playing Tracks in a Specific Order Program PlayRepeat Playback To Adjust the Picture Quality VFP Selecting a Scene Angle AngleTo Zoom In On Pictures Simulated Surround Sound VSS Basic Operation ProcedureTo Display a Menu Bar Menu Bar Functions forMenu bar functions for SVCD/ Video CD/Audio CD About MP3/WMA DiscsBasic operations Selecting a Group and Track About Jpeg DiscsDirect Selection Repeat PlaybackTo See a Specific Picture Viewing Pictures Continuously Slide Show ModeTo Zoom In on a Picture To Select the Start Point of the Slide ShowSlide Show Repeat Function How to Set PreferencesAbout the Preference Display Language MenuPicture Source Picture MenuScreen Saver MP3 and WMA/JPEGTo Set Parental Lock for the First Time Others MenuTroubleshooting Audio GlossarySpecifications Appendix a Country Code List for Parental Lock Appendix BTable of Languages and Their Abbreviations Appendix C Digital Signal Output ChartUSA

RDV-1040 specifications

The Rotel RDV-1040 is a versatile and reliable DVD player that caters to audiophiles and home theater enthusiasts alike. This model represents an excellent blend of advanced technology, user-friendly features, and solid performance, making it a worthy addition to any AV setup.

One of the standout features of the RDV-1040 is its ability to deliver high-quality video playback. The player supports various DVD formats, including DVD-Video, DVD-Audio, and CD playback, ensuring compatibility with a broad range of disc types. The video output includes both composite and component video connections, allowing users to connect the player to various display devices while maintaining excellent picture quality.

In addition to video capabilities, the RDV-1040 shines in its audio performance. It features high-resolution audio processing that enhances the listening experience. The player is equipped with advanced digital-to-analog converters (DACs) that ensure a clean and dynamic sound reproduction, whether you are watching movies or listening to your favorite music. The RDV-1040 supports numerous audio formats, including linear PCM, making it suitable for audiophiles who value sound fidelity.

Connectivity is another strong suit of the Rotel RDV-1040. The player offers a variety of output options, including optical and coaxial digital outputs, making it easy to integrate into a multi-component audio system. Additionally, it features an RS-232 port, which allows for seamless communication with other compatible devices, providing an elevated level of control and automation in your home theater setup.

The RDV-1040 also incorporates innovative technologies to enhance user experience. The player includes an intuitive on-screen display, making navigation easy and straightforward. The robust remote control provides access to all features, ensuring that users can effortlessly operate the player from the comfort of their seats.

In terms of build quality, the Rotel RDV-1040 is constructed with precision and durability in mind. The chassis is designed to minimize resonances and vibrations, ensuring stable operation and consistent performance. This attention to detail not only enhances the sound and image quality but also contributes to the player’s longevity.

Overall, the Rotel RDV-1040 is an impressive DVD player that excels in video performance, audio quality, and connectivity. Its blend of features and technologies make it an excellent choice for anyone looking to create a high-quality home entertainment system. With the RDV-1040, users can enjoy their favorite movies and music with the clarity and depth they deserve.
Top Page Image Contents