This screen shows the total number of tracks selected from the master disc and the total time of those tracks.
6. Press the ENT button. The following screen appears:
Note: Pressing the ▼ button and selecting NO takes you back to Editing tracks.
End Edit Disc And burn? YES
7.Press the ENT button to begin recording the selected tracks to the blank disc. The following screen appears:
8.Once the tracks are copied to the blank disc, the following screen appears:
Copying – 52x Edit 1/16 → 1/1
Burn Complete! OK: 01
9. Press the ESC button to take you to this screen:
If you wish to continue to all more audio tracks to the disc in the recorder drive, press the ▼ button to change the NO to YES. Then press Enter.
Continue Edit Next disc? NO
The TOP reader drive will open and ask you to put in the next master disc. Place the new disc into the drive and close the tray. Go to step 3 and repeat the process.
Once you have completed copying the audio tracks to the BOTTOM disc, you will need to close the disc.
10.At this screen, leave the selection as NO and press ENT:
Once ENT is pressed, the following screen appears:
Continue Edit Next disc? NO
Close all disc’s Sessions? Yes
11. Press the ENT button. The following screen appears:
Closing Session Please wait….
Once the disc is closed, the following screen appears:
Close Complete OK: 01 Fail: 01
Play Audio Track
The Play Audio Track function is used to play an Audio CD that is placed into the TOP reader drive. You will need to plug in head phones into the drive in order to hear the audio.
NOTE: This menu item requires that the drives have headphone jacks on the front drive panel. If no headphone jacks are present, this menu item will not function.
To use the Play Audio Track function, press the ▼▲ buttons until the display reads:
Press the ENT button. The following screen appears:
8. Edit Track
8-01. Edit Track CD to CD Edit
12