DVD Premium Series | MICROBOARDS TECHNOLOGY, LLC |
Main Menu
The Arrow buttons (▼▲)allow you to move forward or backward in the menu without selecting the current menu item. The NO button will move you to the next menu item. YES will select the current menu item.
COPY START? (DISCtoDISC)
NO,▼
SIMULATION? ESC (DISCtoDISC)
NO,▼
DISC ERASE? ESC (REWRITABLE)
NO,▼
SETUP?
(MODE CHANGE)
NO/ESC
YES INSERT MASTER DISC
YES INSERT 
MASTER DISC
YES >QUICK ERASE?
NO,▼
>QUICK ERASE?
NO,▼
>EXIT?
NO,▼
YES
SETUP MENU (see pg 8)
INSERT
TARGET DISC
INSERT
TARGET DISC
YES SURE ?
YES SURE ?
ANALYZING MASTER
ANALYZING MASTER
YES DISC ERASE
Please wait...
YES DISC ERASE
Please wait...
COPY 15:26
20%
SIMULATION 15:26 
20%
Copy Disc to Disc
1.Place the Master Disc into the Reader drive.
Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same media type as the master; you cannot copy a CD master to DVD’s, for instance.
2.The display reads COPY START? (DISC to DISC).
Copy Start? (DISC to DISC)
3.Press YES. If you have the Auto Run feature set to ON, the duplication will begin when the master is loaded and all drives are loaded with blank media.
4.The drive trays will open on any recorder without blank discs installed. If you do not want to make a copy in those drives, close the tray(s), wait for the drive light to go out, and then press the YES button to start the copy job.
5.The display will now show the progress of the Copy Job.
COPY |
|
|
| 4.0GB | |
DVD |
|
|
|
| 25% |
6. The Recorder(s) will eject the recordable discs when the job is complete.
Simulation Disc to Disc
Important: Simulation is not allowed when using DVD+R/RW media.
1.At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows SIMULATION? (DISC to DISC).
SIMULATION?? (DISC to DISC)
2.Place the Master Disc into the Reader drive
3.Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking.
4.Press YES.
7