MicroBoards Technology GX-1 Loading Discs, Front Panel Indicators and Buttons, Cancel Print Power

Page 7

MICROBOARDS TECHNOLOGY, LLC

GX-1 DISC PUBLISHER

Loading Discs

The next step is to load your GX-1 Disc Publisher with output discs. The system will accept CD or DVD 120 mm (12 cm) inkjet printable discs. If the disc does not have an inkjet printable surface, the ink will not adhere to the surface of the disc. The GX-1 Disc Publisher will only accept 12 cm discs. Business card or 8 cm discs are not supported by this system.

Figure 1

Figure 2

Load the first 5 or 6 discs flat, as seen in figure 1.

Load the rest of the discs at an angle, against the wide input rod, as seen in figure 2.

The GX-1 Disc Publisher will hold a maximum of 50 discs. DO NOT load more than 50 discs in the system, as this may cause the discs to feed incorrectly.

Front Panel Indicators and Buttons

1. Cancel

2. Print

3. OK

4. Power

1.Cancel Button – Pressing the Cancel button cancels the current print job.

2.Print Button – The light on this button will flash when printing is in progress.

3.OK Button – This button will only be used when you are prompted to do so while processing discs.

4.Power Button and Light – The Power button turns the GX-1 Disc Publisher on and off. It may take a few seconds for the GX-1 Disc Publisher to turn on after you press the Power button. The green light at the base of the Power button flashes when the printer is processing.

NOTE: The AC power switch located on the back of the GX-1 Disc Publisher must be turned on first in order to supply power to the Front Panel.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents GX-1 Disc Publisher Introduction Table of Contents What’s Included IntroductionSystem Requirements Assembly and InstallationAssembly Instructions GX-1 Disc Publisher AssemblySupported Ink Cartridges Installing Ink CartridgesLoading / Replacing Ink Cartridges Cancel Print Power Front Panel Indicators and ButtonsLoading Discs Connecting to a PC GX-1 Disc Publisher InstallationWindows XP Assembly and Installation Microboards TECHNOLOGY, LLC GX-1 Disc Publisher Select Printing Preferences Setting Printer AlignmentAlignment Print Test DiscPrint Alignment Disc Print Quality Printing PreferencesPaper/Quality Tab Printing RecommendationsColor Tab Advanced FeaturesInk Level Utility TabGX-1 Disc Publisher and Zulu2 GX-1 Disc Publisher and Zulu2 SureThing Labeler Software Re-Installation Manual Software Re-InstallationManual Software Re-Installation Zulu2 Software Re-Installation Printer not printing TroubleshootingDisk Loading error Discs not loading when printing from SureThingTechnical Support Printing Specifications

GX-1 specifications

MicroBoards Technology has cemented its place in the world of technology with its innovative products, and the GX-1 exemplifies this dedication. This state-of-the-art device is primarily designed for the duplication and production of optical media, catering to the needs of various industries, including educational institutions, media companies, and corporate settings.

One of the most significant features of the MicroBoards GX-1 is its ability to perform high-speed, high-capacity duplication of CDs and DVDs. The GX-1 boasts a remarkable duplication speed of up to 48x for CDs and up to 16x for DVDs, allowing users to produce multiple copies in a fraction of the time required by traditional methods. This efficiency is crucial for businesses that need to deliver products promptly.

The GX-1 is equipped with advanced technology that ensures exceptional quality duplication. It utilizes a reliable and sophisticated robotic arm, which helps in automating the loading and unloading of discs. This automation reduces the risk of human error and ensures consistent results across all duplicated media. Additionally, the device features advanced error-checking technology, which verifies the integrity of each copy, ensuring that all produced discs meet the highest standards of quality.

Another notable characteristic of the MicroBoards GX-1 is its user-friendly interface. The setup process is straightforward, and the device operates with minimal training. Users can easily navigate the system using its intuitive controls, which can save time and improve productivity. Furthermore, the GX-1 can be connected to a computer, allowing for easy configuration and customization of duplication settings.

The versatility of the GX-1 is further enhanced by its ability to duplicate a variety of media types, including CD-R, CD-RW, DVD-R, and DVD+R formats. This adaptability makes it an ideal choice for companies with diverse media needs, as it can produce a wide range of content from training videos to promotional materials without the need for multiple devices.

In terms of design, the MicroBoards GX-1 is compact and efficient, making it suitable for desktop use or as a part of a larger production setup. Its durable construction promises longevity, ensuring that users can rely on its performance for years to come.

In summary, the MicroBoards Technology GX-1 is a powerful, efficient, and user-friendly optical media duplication solution. With its high-speed capabilities, advanced error-checking technology, and versatility in media formats, it serves as an indispensable tool for any organization that requires quality duplication services. The GX-1's combination of performance and ease of use positions it as a leader in its class, meeting the demands of today's fast-paced industries.
Top Page Image Contents