BluRay Series | MICROBOARDS TECHNOLOGY, LLC |
8.Place the blank disc(s) into all drive(s) and wait for the LED(s) on the front of the Recorder(s) to go out. The drive designated in the Setup menu as the Reader is available as a Recorder when burning HDD to Disc
9.Press the YES button. If you have the Auto Run feature set to ON, the duplication will begin when all drives are loaded with blank media.
10.The drive trays will open on any recorder without blank discs installed. If you do not want to make a copy in those drives, close the tray(s), wait for the drive light to go out, and then press the YES button to start the copy job.
11.The display will now show the progress of the copy job from the HDD to the Recorder(s):
COPY |
|
|
| 22.4GB | |
BDROM |
|
|
|
| 25% |
12. After the Copy job is complete, the disc(s) will be ejected from the Recorder(s).
Clearing the Hard Drive (HDD)
The Master Clear option will not appear if there is no information stored on any of the hard drive partitions.
1.At the COPY START? (HDD1 to DISC) menu, press the NO or ▼ button until the display shows MASTER SELECT? (HDD1 to DISC).
2.Press the YES button.
3.The display will show:
READER? (DISC to DISC)
4. Press the NO or ▼ button until you the screen displays MASTER CLEAR? (HDD):
MASTER CLEAR? (HDD)
5.Press the YES button
6.You can now select which hard drive partition to erase. Pressing the NO or ▼ button will scroll you though the partition selections.
7.Press the YES button if you are sure you want to clear the HDD.
8.The hard drive will now be cleared and you will be asked if you want to register another master to the HDD.
>HDD1?
(DISC to HDD)
9.Press YES and the Reader drive will eject and you can insert another master to register to the HDD.
REGISTER |
|
| 22.4GB | ||
BDROM |
|
|
|
| 25% |
10. Press NO and to exit this menu without registering data to the hard drive partition.
11