VCR Setting
Clock
•Press VCR button to change into VCR Mode and follow the procedures below.
1 Press the SETUP button on the remote control.
2 Press the ENTER button, while highlighting CLOCK SET.
3 Set the current date and time with button and
NUMBER buttons.
For DATE SET, follow the order of Month/Day/ Year ; for TIME SET, follow the order of Hour/Minute in CLOCK SET screen. 4 Press SETUP button to confirm your selection.
5. Press SETUP button again to get out of the menu system.
Programming a Recording
1 In VCR mode press the SETUP button on the remote control. 2 Press the button to select the “Program Set” and press ENTER button.
3 Select “Channel”
cable video 1 video 2 Antenna
•If you choose Cable or Antenna as the input signal, press the button once to be able to set the channel number using the numerical buttons.
4 Select “Start Date”
•Move into “Start Date “with button and then, select the desired number to record with up/down button or number button
5 Select “REC cycle”.
•Move into “REC Cycle” with button and then, select the desired one with up/down button
•REC cycle changes in the following order:
One Time weekly weekdays Daily
6 Select Start Time
•Move into “Start Time” with button and then, select the desired number to record with up/down button or number
button.
7 Select End time
•Move into "End Time" with button and then, select the desired number to record with Up/down button or number button.
8 Select Tape Speed
•Move into "Tape Speed" with button and then, select the desired one with up/down button
•Recording speed changes in the following order:
SP SLP
•Press SETUP button to confirm the program. Note that the player offers you the ability to
•Press NEXT and PREV button to scroll through the 8 event- programming screens.
•Press the POWER button to activate timer recording.
Channel Set-up
•This function can only be accessed in STOP mode (when there is no tape playing).
•Press VCR button to change into VCR mode and follow the procedure below.
1 Press the SETUP button on the remote control.
2 Press the button to highlight and select (Enter) the “ Channel Set”.
3 Selecting cable or antenna viewing
•You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA(antenna connection). To set the viewing mode:
•Press ENTER to toggle between CABLE and ANTENNA.
4. SELECT “Manual Set”
This function allows you to manually add / delete channels from the TV’s memory (in case you don’t like a certain channel
or if you are missing a certain channel).
Press the ▼ button until “Manual Set” is highlighted. Use the / or numerical buttons to select the channel you want to add / erase. Now press the ENTER button to toggle between “Add” and “Erase”. If you select “Add”. the channel will be memorized. If you select “Erase”, the channel will be removed
from memory. Press the / buttons now to select another channel you want to modify. Once you are done making channel modifications, either press ▼/ ▲ buttons to move to another setting, or press SETUP button to return to previous menu.
5 SELECT “Auto Preset”
•Press button in Channel Set to highlight “Auto Preset”
•Press ENTER button to detect all the available channels automatically and memorize them.
On-Screen Menu Language
1 Press the SETUP button on the remote control. The initial MENU is displayed.
2 Press the button to select the “Language Select” and
press ENTER button
3 Select the language among English, Spanish and French.
12