Replacing the Battery
Your Rz2 remote control comes with one CR2032 battery which must be installed. When the range of the remote seems reduced or if it ceases to work properly, it’s time to replace the battery.
1.Slide battery compartment cover on rear of remote control off (remove old battery if replacing).
2.Place new CR2032 in battery well as shown (make sure +/- polarity matches markings).
3.Replace battery compartment cover.
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.
Troubleshooting
Battery compartment cover
Rz2
Problem: Remote doesn’t work
Solutions:
A.Make sure you are within 15 feet of the unit and that the remote is pointed at the front of the unit.
B.Try replacing the battery (see above).
For customer service, contact us toll free at
RZ2 | 3 |
Printed in china |
basstreble
reset
Rz2