Easy, Three-Step Remote Programming

Quick Setup Guide - Programming The Klipsch Icon™ SB 1 To Your TV Remote

The Klipsch Icon™ SB 1 soundbar has four control buttons under the status indicator lights on its front panel. From the top button down, they are Source, Mute, Volume Up, and Volume Down. MUTE, VOLUME UP, AND VOLUME DOWN can easily be programmed to your TV, Satellite or Cable box remote control so that you can use that remote to control these functions.

NOTE: The Klipsch Icon™ SB 1 model comes with its own remote and controls not only the four control buttons but has a separate button for the 3D Surround Mode On/Off feature. MUTE, VOLUME UP, AND VOLUME DOWN can be programmed into other remote controls using the built- in Learning Remote feature, but the 3D Surround mode On/Off button cannot be learned by any other remote and must be controlled with the included remote.

Status LightS

Source

Mute

Volume Up

Volume Down

IMPORTANT NOTE: There is not a power on/off button on the front of the soundbar (there is a Main Power switch on the soundbar’s rear panel). You do not need to turn off the soundbar (or subwoofer) when finished watching TV. When finished, turn off your TV (or Satellite or Cable box if the soundbar is connected to that). The soundbar (and the subwoofer) will automatically go into a Standby or “sleep” mode if they do not receive an audio signal from your TV, Satellite or Cable Box for approximately 10 minutes. Standby mode is indicated by a solid red status light on the soundbar front and on the subwoofer rear panel. When your TV, Satellite or Cable box is turned back on and a signal is again received, the soundbar (and subwoofer) will automatically come out of Standby mode and turn on.

The following 3 steps should be used to program each function of your TV or cable box remote control buttons (MUTE, VOLUME UP, and VOLUME DOWN). IF THE SOUNDBAR IS IN STANDBY MODE (solid RED status light), push the <SOURCE> button on the sound- bar until the status light is solid GREEN.

STEP ONE (Place the unit in learning mode): With the status light showing solid GREEN, press and hold the <SOURCE> and <MUTE> buttons on the front of the soundbar at the same time (approximately 3 seconds) until the status light flashes RED and GREEN.

STEP TWO (Select the function to learn): Press the <MUTE> button once on the soundbar (the status light changes to solid ORANGE). (Substitute the VOLUME UP, and VOLUME DOWN in place of <MUTE> when programming the other buttons during this step)

STEP THREE (Learn the function): Hold your remote control within one foot and pointed at the front of the soundbar. Slowly press the <MUTE> button on your remote control four times. On the first three presses, the status indicator light will flicker ORANGE with each press. If the unit has successfully learned the function, on the fourth press of the button, the light will flash GREEN several times and then turn to solid GREEN. (Remem- ber to use the VOLUME UP, and VOLUME DOWN in place of <MUTE> when program- ming the other buttons during this step)

To program the remaining functions, simply repeat all steps, substituting <MUTE> with the new function and button presses (VOLUME UP, and VOLUME DOWN) on steps TWO and THREE.

Red and	Solid
Green	Orange
(alternating)

1 Foot

SB 1 specifications

The Klipsch SB 1 is a soundbar designed to elevate your home theater experience with its exceptional audio quality and sleek design. As part of Klipsch's renowned audio lineup, the SB 1 encapsulates the brand's commitment to high-performance sound and stylish aesthetics.

One of the key features of the SB 1 is its immersive sound technology. The soundbar is engineered with proprietary Klipsch Tractrix Horn-loaded technology, which enhances clarity and projection of sound. This innovative approach allows the soundbar to deliver clear dialogues and rich, enveloping audio, making it ideal for movies, music, and gaming alike.

The SB 1 houses dual 3-inch full-range drivers that are capable of producing dynamic sound with remarkable detail. These drivers work in tandem with the soundbar’s built-in amplifier, providing powerful audio output even in larger rooms. The sleek design of the soundbar ensures that it complements any home decor while still maintaining an impactful presence in your media setup.

In terms of connectivity, the Klipsch SB 1 offers versatile options to accommodate various devices. It features multiple HDMI inputs, optical audio inputs, and 3.5mm inputs, making it simple to connect to TVs, gaming consoles, and other audio sources. Additionally, the soundbar supports Bluetooth streaming, allowing users to easily play music from smartphones or tablets.

The SB 1 is equipped with built-in EQ (equalization) settings that allow users to customize their listening experience. This feature enables enthusiasts to adjust sound profiles to suit specific preferences, whether they prefer a cinematic experience with booming bass or a more balanced audio output for casual listening.

Another noteworthy characteristic of the Klipsch SB 1 is its wireless subwoofer compatibility, which further enhances the bass response. Users can pair the soundbar with a wireless subwoofer to achieve deep, thumping bass that can shake the room during movie scenes or concerts.

In summary, the Klipsch SB 1 is a feature-rich soundbar that brings high-fidelity sound into your home. With its advanced technologies, versatile connectivity options, and elegant design, the SB 1 is an excellent choice for anyone looking to enhance their audio experience without the complexity of a full surround sound system. Whether for watching movies, gaming, or enjoying music, the Klipsch SB 1 is sure to impress with its performance and quality.