JVC 2B00401C, LPT0719-001A Inserting Batteries, Battery precautions, Remote control basics

Page 11

 

 

Remote control

Inserting Batteries

 

 

1 Open the battery compart-

2 Install two "AA" batteries (supplied),

3 Replace the compartment

ment cover in the direction of

paying attention to the polarity

cover.

the arrow.

diagram in the battery compartment.

 

Battery precautions

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

Remote control basics

•Press POWER to turn the DVD/VCR on or off.

•Make sure TV/VCR/DVD switch is set to VCR/DVD.

•Tap VCR CH + or VCR CH –to move through the channels one channel at a time.

•The VCR CH +/–and SET +/–are also used to navigate on-screen menu system.

•You can directly access specific channels using Number keys pad.

•Each press of VCR or DVD, switches the screen between the VCR screen (VCR mode) and the DVD screen (DVD mode).

Operation

 

• Aim the remote control at the remote sensor and press control buttons

 

to operate.

 

• Operate the remote control within 30° angle on either side of the remote

Approx. 5 meters

sensor, up to a distance of Approx. 5 meters.

 

Change the custom code for remote control

If you operate this DVD/VCR with another JVC’s VCR simultaneously arranging them side by side, the both recorders will react to this remote control. In this case, you can change the remote control and DVD/VCR to other frequency (“ ”). Then you can operate only this DVD/VCR with this changed remote control.

When you purchased, the DVD/VCR and remote control have been set to the frequency-“ ”.

Example: Change frequency to

Remote control:

While holding VCR, press 2(code: b) of Number keys. (in case of code: A, press 1)

TV

VCR

DVD

POWER

 

DVDMENU

MARKER

RETURN

OPEN/

CLOSE

 

SUB TITLE

ANGLE

SEARCH

 

MODE

SP/EP

 

 

 

PLAY

ZOOM

TITLE

REPEAT

MODE

A-B

TV

POWER

INPUT

TVVOL

0 TIMER TV/VCR

DVD/VCR:

In the POWER off mode,

press and hold PLAY for more than 5 seconds. “b”

will appear on the display

OPEN/CLOSE

REW FF

REC DVD

 

 

PLAY STOP

 

and then disappear after

 

 

 

approx. 4 seconds.

 

 

 

NOTES:

•If the remote control has been set to b, the DVD/VCR also must be set to b. Otherwise, the DVD/VCR can not be operated with this remote control.

•To reset to “A”, repeat above procedure. However press 1 instead of 2.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DVD/CD Player Risk of Electric Shock Do not Open Location of the required MarkingPOWER-CORD Protection CleaningAccessories Power SourcesSafety Check Power LinesDamage Requiring Service Replacement PartsDisc Power SourceTo USE AC Power Source Laser BeamDVD Section FeaturesDVD/CD Player/Video Cassette Recorder VCR SectionContents Rear Parts and functionsFront Display window Explanation for On-Screen-SymbolDisplay JVC TV Remote Control Remote controlChange the custom code for remote control Remote controlBattery precautions Remote control basicsSeparate VHF and UHF Antennas Basic connectionsCombination VHF/UHF Antenna with 75 ohm Coaxial Cable Ohm Coaxial Cable supplied Splitter Basic connectionsDescrambler Catv Cable TV connectionsIncoming Cable ConverterSplitter Descrambler Incoming Converter CableDescrambler SwitchCatv Cable TV connections Cable DescramblerConnect to a BS Tuner Playback ConnectionConnect to a TV with Audio/Video Output Connect to a TV with S-Video OutputConnect to an AV Amplifier with built-in digital surround Connecting the optical digital cablePlayback Connection Connect to a Stereo Amplifier with Audio OutputEnter Setting the Video Channel / Setting the languageSetting the Video Channel Setting the languageWill light Tuner SettingTurn on the TV and set it to the video input mode Make sure TV/VCR/DVD switch has been slided to VCR/DVDNoise elimination To ADD/DELETE channels / Noise eliminationTo ADD/DELETE channels Press To select your Time Auto clock settingStandard Time option, then Press EnterSaving TIME, then press Enter Auto clock settingDaylight saving time setting Press To select DaylightTo make corrections any time during the process Manual clock settingLoading and Unloading a Cassette Tape To rewind the tape or forward it rapidly Forward/Reverse picture search modeCassette tape Playback To stop playbackSpecial playback DISPLAY-button Zero Return function / Video Index Search systemZero Return function Video Index Search systemAppear on the display Recording a TV programRecording and viewing the same TV program Recording a TV program Press Number keys or VCR CH +/-to Instant Timer Recording ITRTo cancel ITR Through Timer RecordingTo return to the normal screen Press Setup Menu twice To enter other programs, repeat stepCase Timer programs-overlap Timer-RecordingTimer Recording Special case Confirmation / Cancellation of the Timer RecordingListening to SAP Stereo Recording and PlaybackSeparate Audio Program SAP Output selectionConnection with Video camera Duplicating a video tapeDuplicating a disc material onto a video tape Connection with second Video recorderDisc Setup language can be selected Preparation Setting setup languagePress OPEN/CLOSE Playback procedureFrame Advance Fast Forward PlaybackReview Playback Still PlaybackLocating Desired Scene Zooming / Locating Desired SceneZooming Title, Chapter, Track Playback Press Play Mode during playback or stop modeRepeat playback You can arrange the order of tracks on the disc Program playback/Random playback CDProgram playback Random playbackLimitations on display MP3 PlaybackMP3 CD Information Limitations on MP3 CD playbackReturning to the Scenes To Cancel the MarkMarking Desired Scenes Marking the ScenesCase of Video CD playback Changing soundtrack language / SubtitlesChanging soundtrack language Turning the Subtitles On and OffDVD Menu Changing angles / Title selection / DVD menuChanging Angles Title SelectionParental control Parental control settingTo unlock the Parental Control Setting CancelTemporary disabling of rating level by DVD disc English, Francais, Espanol Setting menu languageAutomatic Setting subtitle languageMode Press To select Language OtherTo cancel Surround mode Setting audio soundtrack languageSetting surround sound Power offPAN Scan Setting the aspect ratio of TV screenYou can select the aspect ratio for your TV Preparation Normal TVVideo Setting on Screen display / Status display of DiscStatus display of Disc DVDDynamic Range Control Press Setup Menu in the stop mode. Press or to select SoundLanguage Code List Display is not shown in your Problems and troubleshootingSymptoms Possible Solutions DVD/VCR VCRSymptoms Possible Solutions Problems and troubleshooting / Video head cleaningVideo head cleaning Auto Clock SettingDVD section SpecificationsGeneral VCR sectionNew Maple Avenue Pine Brook, NJ For Servicing Only in U.S.AWhat WE will do What YOU Must do for Warranty ServiceWhat is not Covered For customer useHR-XVC1UC/M 2B00401C U 02/06

LPT0719-001A, 2B00401C specifications

The JVC 2B00401C, also known as LPT0719-001A, is a remarkable audio-visual component that showcases JVC's commitment to delivering high-quality performance and innovative technologies. This product is designed for audiophiles and casual users alike, offering a blend of advanced features and solid construction to elevate your audio-visual experience.

One of the standout features of the JVC 2B00401C is its superior sound quality. With its advanced audio processing capabilities, it can reproduce audio with astonishing clarity and depth. The device incorporates the latest digital signal processing technologies, ensuring that users enjoy a well-balanced sound signature, whether they are listening to music, watching movies, or playing video games.

In terms of connectivity, the JVC 2B00401C offers a wide array of options. It supports Bluetooth and Wi-Fi connectivity, allowing users to stream audio from their smartphones or tablets seamlessly. Moreover, it includes multiple HDMI inputs and outputs, which are essential for modern home theater setups. This versatility makes it easy for users to connect various devices, including gaming consoles, Blu-ray players, and streaming devices.

One of the prominent technologies featured in the JVC 2B00401C is its proprietary audio enhancement algorithms. These algorithms dynamically adjust sound output to suit different environments, ensuring optimal sound quality regardless of the room’s acoustics. Coupled with features such as equalization and sound presets, users can further tailor their listening experience to match their preferences.

In terms of build quality, the JVC 2B00401C is made with durable materials that reflect its robust design. This component is built to withstand the rigors of regular use while maintaining a sleek and modern aesthetic. The intuitive user interface, along with an easy-to-navigate remote control, enhances the overall user experience, making it user-friendly for individuals of all skill levels.

Additionally, the JVC 2B00401C is energy-efficient, incorporating various technologies to minimize power consumption without sacrificing performance. This feature not only benefits users economically but also contributes to environmentally friendly practices.

In summary, the JVC 2B00401C, LPT0719-001A, stands out in the competitive market of audio-visual equipment due to its exceptional sound quality, diverse connectivity options, advanced audio processing technologies, durable build, and energy efficiency. This makes it an ideal choice for anyone looking to enhance their audio-visual setup.
Top Page Image Contents