Magnavox MWD2206A owner manual Functions, Hints for OTR and Timer Recording

Page 13

6

Select “AM” or “PM”.

 

 

 

 

 

Then press [B] to go to next step.

ONE TIME PROGRAM

 

 

 

PROGRAM NUMBER

1

 

 

DATE

1 0

/ 2  MON

 

 

START TIME

0 7

:  0

PM

 

or

END TIME

– – : – –

– –

 

CHANNEL

– –

 

 

 

 

 

 

 

 

REC SPEED

– –

 

AM

 

 

 

 

 

 

 

 

 

B PM

7

Repeat the procedure in steps 5 and 6 to set the end time.

8

Select the desired channel.

 

 

 

 

 

Then press [B] to go to next step.

ONE TIME PROGRAM

 

 

 

PROGRAM NUMBER

1

 

 

DATE

1 0

/ 2  MON

 

 

START TIME

0 7

:  0

PM

 

or

END TIME

0 8

:  0

PM

 

CHANNEL

1 6

 

 

 

 

REC SPEED

– –

 

 

•If you have connected the unit to a cable box or satel- lite box as the connection on page 6, select the VCR to channel 3 or 4 (the RF output channel of the VCR). Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for Timer Recording.

9

Select the desired recording speed, then press

 

 

 

[CLEAR/C.RESET].

 

ONE TIME PROGRAM

 

 

 

CLEAR/

PROGRAM NUMBER

1

 

 

DATE

1 0

/ 2  MON

 

 

C. RESET

 

 

START TIME

0 7

:  0

PM

 

 

 

 

or

 

END TIME

0 8

:  0

PM

 

 

CHANNEL

1 6

 

 

 

 

 

 

 

 

 

 

REC SPEED

SP

 

 

 

 

 

B SP

 

 

 

 

 

 

SLP

 

•To set another program after step 9, press [B]. Then, continue with step 2.

10 Press [SUBTITLE/T-SET]to set timer standby mode.

SUBTITLE

T-SET

•TIMER REC indicator on the front panel lights up. The unit will change to the DVD mode.

•To go back one step, press [s] during steps  to 9.

To Check, Correct or Cancel a Timer Program

1)Press [SUBTITLE/T-SET] then, [VCR] on the remote control.

2)Select main menu by pressing [MENU].

) Select “TIMER PROGRAMMING” by using [K/L], then press [B].

4)Select the program number which you want to check by using [K/L]. The details of the program you selected will appear on the TV screen.

•Go to the digit you want to change by using [s/B]. Then, enter correct numbers by using [K/L].

•You may cancel the entire program by pressing [s] while the program number blinks.

5)Press [CLEAR/C.RESET] to exit.

6)Press [SUBTITLE/T-SET]to return to timer standby mode.

To cancel a Timer Recording in progress

Press [STOP/EJECT C A] on the unit.

Functions

Hints for OTR and Timer Recording

•Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR mode, then press [SUBTITLE/T-SET].

•If a tape is not in the unit or does not have the record tab, TIMER REC indicator on the front panel blinks and Timer Recording cannot be performed. Please insert a recordable tape.

•When Timer Recordings are set, TIMER REC indicator on the front panel lights up. To use the VCR as usual until the time for the recording, press [SUBTITLE/T-SET]so that TIMER REC indicator lights off. Press [VCR/TV] to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

After an OTR or a Timer Recording has been set, this unit operates as follows:

•If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape, and switches to the DVD mode automatically. If the DVD power is off, the unit does not switch to the DVD mode but goes into the timer standby mode. Press [SUBTITLE/T-SET]on the remote control or [STOP/EJECT C A] on the unit, then press [VCR] to activate the VCR function again.

•Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET]is pressed. ([SOURCE] on the front panel and [VCR] on the remote control will not function.)

•To cancel the timer standby mode, press [SUBTITLE/T-SET]on the remote control or [STOP/EJECT C A] on the unit, then press [VCR] to activate the VCR function again.

•The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after you cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you operate.

When an OTR or a Timer Recording is completed...

•If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically, and TIMER REC indicator on the front panel lights to indicate the unit is in the timer standby mode.

•TIMER REC indicator on the front panel flashes if there are no more Timer Recordings on standby.

•If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.

If you want to use the DVD player during a Timer Recording or while TIMER REC indicator on the front panel is on or blinking.

•Press [STANDBY-ON]to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual.

NOTE (for Timer Recording) :

• If there is a power failure or the unit is unplugged for more than 0 seconds, clock and all timer settings will be lost.

VCR

– 1 –

EN

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Setup PrecautionsSupplied Accessories Table of ContentsLaser Safety PrecautionsMake your contribution to the environment Important Safeguards Maintenance Symbols Used in This ManualLocation and Handling Avoid the Hazards of Electrical Shock and FirePlayable Video Cassettes About the Video Cassettes and DiscsPlayable Discs Unplayable DiscsConnections SetupHint Good picture Connection to a TVBetter picture Best picturePreparation for Use Clock SetupTurn On the Unit for the First Time To Add or Delete ChannelsVCR / DVD Switching Front Panel IndicatorFunction Overview Front & Rear TerminalsInstalling the Batteries for the Remote Control Remote ControlKeep in mind the following when using the remote control Either side of centerPlayback VCR FunctionsOther Operations VCR FunctionsRecording Timer RecordingAuto Repeat Recording & OTR One Touch RecordingTo Check, Correct or Cancel a Timer Program Hints for OTR and Timer RecordingTo cancel a Timer Recording in progress When an OTR or a Timer Recording is completedConnect Copying a Video TapeBack of another source Back of DVD/VCR DVD Functions DVD FunctionsCurrent playback status On-Screen DisplayElapsed time of the current chapter CHChapter L0 Layer 0 is playing L1 Layer 1 is playingSearch Functions Repeat Playback Random Playback Repeat / Random / Programmed PlaybackProgrammed Playback Repeat A-B PlaybackSpecial Settings Quick Setup Menu DVD Setup DVDLanguage Setting Custom MenuAudio Setting Display SettingFunctions Audio menuParental Setting To Change the Password for Parental ControlsOthers Setting Parental LevelsReset to the Default Setting Except for Parental Setting Troubleshooting GuideInformation InformationLanguage Code List SpecificationsLanguage Consejo EspañolReproducción de DVD Reproducción de la grabadora de vídeoControl remoto Antes Encienda el televisor y cambie al canalControl VCR/DVD Switching Installing the Batteries for the RemoteClock Set Up Quick Use GuideDVD/CD Playback VCR PlaybackBefore Turn on the TV and set it to channel 1VMN22563 / H986NUD

MWD2206A specifications

The Magnavox MWD2206A is a versatile and compact multimedia player designed to cater to various audiovisual needs. This device seamlessly combines capabilities of a DVD player with a CD player, making it an ideal choice for individuals looking to enjoy their favorite movies and music formats in one unit.

One of the primary features of the MWD2206A is its support for multiple disc formats, including DVD, DVD-R/RW, CD, CD-R/RW, and JPEG discs. This versatility allows users to not only play traditional DVDs but also enjoy personal media stored on CD-R and CD-RW formats. The player supports a wide range of audio and video file formats, ensuring compatibility with most media formats available.

User convenience is central to the design of the MWD2206A. The device boasts a user-friendly interface that makes navigation through menus easy and intuitive. It includes a remote control, allowing users to operate the player from a distance, enhancing the viewing experience. The large display screen provides clear feedback and status updates for ease of use.

Another highlight of the Magnavox MWD2206A is its exceptional video and audio quality. The player is engineered to deliver sharp visuals and crystal-clear sound, elevating the multimedia experience. With built-in Dolby Digital decoder, it can produce impressive audio quality for home entertainment setups.

The MWD2206A is designed with several connectivity options, including composite and S-video outputs, allowing for easy connections to TVs and audio systems. This flexibility enables users to integrate the player into their existing home entertainment systems without hassle.

Moreover, the compact design of the MWD2206A ensures that it can fit into various spaces, whether on a shelf, within a media cabinet, or even while traveling. Its lightweight construction adds to its portability, making it suitable for both home use and on-the-go entertainment.

In summary, the Magnavox MWD2206A stands out as a reliable multimedia player that combines versatility, user-friendliness, and quality performance. With its ability to handle various audio and video formats, coupled with easy connectivity options, this player is perfect for anyone looking to enjoy a range of entertainment options in a single device. Whether for movie nights or music playback, the MWD2206A is an excellent addition to any media collection.
Top Page Image Contents