Magnavox ZV457MG9 owner manual Frequently Asked Questions, Rec, Output Jacks

Page 98

TROUBLESHOOTING

VCR

Symptom

Remedy

There is no picture.

• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /

 

HDMI OUT jack, connect it to AUDIO / VIDEO OUT jack instead.

Picture noise appears.

• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”

 

(page 5).

 

• Adjust tracking control for better picture by pressing [CHANNEL / ]

 

while you are playing back a cassette tape.

The cassette tape does not play back.

• No cassette tape is inserted.

Recording does not start after you press

• Make sure the cassette tape has an erase-protection tab when you

[REC I].

record to a cassette tape. If needed, cover the hole with cellophane

 

tape.

The remote control does not function.

• Check if a cassette tape is in this unit.

The motor rotates even when

• The motor may rotate for the duration of approximately 5 minutes for

playback / recording is stopped.

efficient operation. This is not a malfunction.

Frequently Asked Questions

–Can I record to CD-RW/-R?

–Can I play back DVD-video that is bought in another country?

–Can I connect the unit to my PC?

–Can I program a timer recording with cable/satellite box?

–Can I record one channel while watching another channel using a cable / satellite box?

–Can I connect this unit directly to a TV which only has an antenna in jack using an RF coaxial cable?

–Can I change the channels on the cable / satellite box using the remote control of this unit?

No, this unit records only DVD.

Possible when the region code of the disc is 1 and All.

No, you cannot control the unit by PC.

Yes, you can. Select “L1” or “L2” as your recording channel, and leave the cable / satellite box on (pages 17, 42-45).

It depends on your connection configurations. For more details, please kindly contact your cable / satellite provider.

No. You need an RF modulator (commercially available) to connect this unit to a TV which only has an antenna in jack (page 16). This unit does not have an RF modulator.

No. Changing the channels on the cable / satellite box using this unit’s remote control is not possible. You need to use the remote control supplied with the cable / satellite box to change the channels on the cable / satellite box.

Note for Output Jacks on the Rear Panel

1

HDMI OUT

 

DVD

 

DIGITAL

AUDIO

S-VIDEO

COMPONENT

AUDIO OUT

OUT

 

VIDEO OUT

 

 

 

Y

 

L

OUT

PB

 

/CB

COAXIAL

 

 

 

 

R

 

PR

 

 

/CR

 

DVD/VCR

 

S-VIDEO

IN --- AUDIO---OUT

 

 

L

L

IN

R

R

 

IN ---VIDEO---OUT

OUT

IN

ANTENNA

 

2

3

4

5

6

Available for

DVD mode

 

 

VCR mode

 

Output Jacks

 

 

 

 

 

 

 

 

1 HDMI OUT

✔

 

 

 

 

2 COAXIAL DIGITAL AUDIO OUT

✔

 

 

 

 

3 AUDIO OUT

✔

 

 

 

 

4 S-VIDEO OUT

✔

 

 

 

 

5 COMPONENT VIDEO OUT - interlace

✔

 

 

 

 

5 COMPONENT VIDEO OUT - progressive

✔

 

 

 

 

6 AUDIO/VIDEO OUT

✔

 

 

✔

 

✔ : Available

: Not available

 

 

 

 

98EN

Page 97 Page 99
Image 98
Page 97 Page 99
Contents ZV457MG9 Precautions Do not OpenPrecautions FCC WarningDew Condensation Warning Supplied AccessoriesLocation and Handling To Avoid the Hazards of Electrical Shock and FireCleaning discs Maintenance ServicingCleaning the cabinet Cleaning the disc lens Disc handlingContents Contents Features Description refers to DVD+RW Description refers to DVD-RW FeaturesSymbol Description Functional Overview Front Panel 21 2019 18 13 12 11 10 9 812 11 Functional OverviewRear Panel Close the cover Remote ControlOpen the cover Insert batteries 2625REW E button DVD/VCR DVD mode Confirm button DVD/VCR Analog modeNumber buttons Digital mode VCR modeCurrent status of the unit Front Panel DisplayDisplay Message Displays the followingDisconnect the power cord of your TV from the AC outlet Antenna Cable ConnectionPlug in the power cords of the devices to the AC outlet RF Modulator ConnectionWith this setup Connections BasicThis unit Available on DVD only Method Analog audio Good pictureActual Output Modes by Media Hdmi Mode and Actual Output SignalsInterlaced Press Hdmi Progressive Cables not includedAudio SettingConnection to AN Audio System Connection Dolby DigitalFinding the Viewing Channel on Your TV Setting onBefore YOU Start Turn on your TVMP3 Tag Information Before YOU StartGuide to On-Screen Display / Menu Hdmi InformationFirst, track name will be displayed Title Name InformationFile Name Information Main Menu How to Insert a Disc Switching DVD / VCR ModeHow to Insert a Disc / Cassette Tape How to Insert a Cassette TapeInitial Setting Setting onAuto Channel Scan Channel SettingWhen scanning is over, press Setup to exit ScanningAdding / Deleting Channels Channel SettingUse K / L to select Manual Channel Preset, then press OK Use K / L to select Channel, then press OKUse K / L to select Add or Delete, then press OK Press Setup to exitSelect the channel number to add or delete Select the channel number to deletePress Setup to exit Press STANDBY-ON y to turn off the unit Setting the ClockAuto Clock Setting Press Setup and turn off the unitUse K / L to select Clock Setting, then press OK Setting the ClockManual Clock Setting Daylight Saving TimeChannel Selection Tuner SettingsSwitching Analog Mode Digital Mode Tuner Settings Selecting TV AudioSAP secondary audio program Selecting TV Audio cont’dStereo DTV Closed Caption Use K / L to select Caption Service, then press OKService 1 to Service Use K / L to select Display, then press OKUse K / L to select ON, then press Use K / L to select User Setting, then press OKClosed Caption Style Edge Color Font SizeEdge Type Font StyleRecordable Discs Recording ModeInformation on DVD Recording Unrecordable DiscsMake Recording Compatible Setting for Auto ChapterBefore Recording Recording the DTV Closed CaptionDesired channel to record Press REC Mode to select a recording modeRefer to Recording Mode on Follow the steps to record TV programsPress Stop C Press Stop C to exit the title listPress REC I repeatedly until the desired length appear Use K / L to enter the date, then press B Timer RecordingPress Timer Use K / L to select New Program, then press OK Timer Recording Press OK when all items are EnteredStop C on the remote control is not effective To stop the timer recording in progressHow to select a channel number for the timer recording Press Timer SET Check the informationHints for Timer Recording Priority of Overlapped SettingsTitle Overwriting Unnecessary TitleOverwriting from the Beginning Overwriting in the Middle of the TitleOverwrite recording a Existing title B After overwriting Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B Existing title CSettings for AN External Device Connection to an External DevicePress VCR Settings for AN External DeviceRecording from an External Device Recording to a DVDPress DVDUse K / L to select Dubbing Mode, then press OK BI-DIRECTIONAL DubbingUse K / L to select Recording, then press OK Preparing for dubbing cassette tape to DVDUse K / L to select DVD VCR, then press OK BI-DIRECTIONAL DubbingUse K / L to select VCR DVD, then press OK Press Stop C to stop the dubbingOFF ON, then press OK. e.g. DVD+RW Setting a Disc to ProtectUse K / L to select Yes, then press OK Disc will be protectedUse K / L to select Finalize, then press OK Press SetupFinalizing a Disc Finalizing is completedPlaying the Discs on Other DVD Players Auto FinalizingUnplayable Discs Information on PlaybackPlayable Discs and Files Color SystemsPBC playback control for Video CD CD Playback Mode menu will appearInformation on Playback Hint for DVD PlaybackPress Play B to start playback Basic PlaybackDirect Playback Press Stop C once to stop playback temporarilyUse K / L to select a desired title Basic PlaybackPlayback from the Title List Use K / L to select Play, thenPlayback will start When selecting track/filePlaying Back an Audio CD and a CD-RW/-R with MP3 Files Hints for audio CD tracks and MP3 filesDuring playback, press Pause F Using the Title / Disc MenuPause Playback will be paused and sound will be mutedFast Forward / Fast Reverse Playback Special PlaybackResume Playback Skipping TV Commercials During PlaybackSlow Forward / Slow Reverse Playback Special PlaybackStep by Step Playback ZoomMarker Setting Repeat Playback Use K / L to select Random Play, then press OK Random PlaybackProgram Playback Repeat this step until you program all the desired tracksSearch Using H / GUsing Display Title / Chapter SearchAudio CD SearchTime Search For DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Selecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block NoiseEditing Discs Information on Disc EditingGuide to a Title List Press DVD, then press TitlePress DVD first Press Title Editing DiscsDeleting Titles Use K / L to select Edit, thenUse K / L to select Edit Title Editing DiscsPutting Names on Titles After this operation is completed, press Return to exitPress Return twice to exit Setting Chapter MarksUse K / L to select Add, then press OK Submenu will appearClearing Chapter Marks Edit Chapter Mark DeleteAll chapter marks will be deleted Clearing Chapter Marks cont’dTo delete all chapter marks Hiding Chapters Picture for thumbnail will be set Setting Pictures for ThumbnailsPress Return to exit Dividing a Title Use K / L to select Yes, then pressYou can put a name on the disc and change it from this menu When you finish entering a title name, pressPutting Name on Disc Name, then press OK. e.g. DVD+RWErasing Disc Making Edits Compatible Compatible, then press OKList of Settings ContentsList of Settings TV-PG TV-G TV-Y7VCR DVD Use K / L to select Playback, then press OK SetupsPlayback Use K / L to select a desired item, then press OKPlayback cont’d SetupsParental Lock Default OFF YesSubtitle Language Default OFF Disc Menu Language Default EnglishAudio Language Default Original Angle Icon Default onOn pages 85-86 DisplayUse K / L to select a desired item Set Selected itemChip FL Dimmer Default BrightDisplay cont’d Canadian English Rating Change Password Change the current passwordUse the Number Buttons to enter new access password To set the ratingVideo Progressive Scan Default OFFTV Aspect Default 43 Letter Box Refer to 1 to 2 on this page and setHdmi Audio Default on When you finish with the setting, press Setup to exitFormat Default RGB RGB Range Default NormalReset the setting to default Reset AllSelect Yes again using K / L , then press OK Your setting in recording will be initializedVCR Functions Select the recording mode using REC ModeRecording mode To resume playbackYou cannot pause the one-touch timer recording One-touch Timer Recording OTRPress REC I to begin the one-touch timer recording VCR Functions Other Operations Troubleshooting Symptom RemedyRepairing process MAY not work TroubleshootingOPEN/CLOSE a to take out the disc. The disc canceled during Press OPEN/CLOSE aOutput Jacks Frequently Asked QuestionsREC Disc Error message Cause Solution Language Code Language CodeGlossary Recording SpecificationsGeneral TunerDisco Grabable EspañolDiscos Reproducibles Códigos de RegiónEspañol Parte trasera de este aparatoOPEN/CLOSE a para cerrar la bandeja de discos Presione STANDBY-ON yPresione OPEN/CLOSE a Para seleccionar un modo deDe discos Presione Abra la bandeja deDVD Memo Tel 1VMN25873
Related manuals
Manual 2 pages 14.32 Kb
Top Page Image Contents