Magnavox MWR20V6 manual Video setting, Progressive Scan Default OFF, Still Mode Default Auto

71 Español

Changing the Setup menu

Video setting

Progressive Scan (Default : OFF)

This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.

1	CLEAR/C-RESET SPACE	TITLE
	0

Before you start

Press [SETUP].

2

Using [K / L], select “Playback”. Press [OK].

3

Using [K / L], select “Video”. Press [OK].

4

Using [K / L], select “Progressive Scan”. Press [OK].

	RETURN			DISPLAY
2		OK			1	Connections
	DISC MENU			SETUP
3
4					8
5		CHANNEL
	TIMER	VCR REC	DVD REC	REC MODE		Getting
6	TIMER SET	SLOW	CM SKIP	RAPID PLAY

5

Using [K / L], select “ON”. Press [OK].

Confirmation window will appear.

Video - Progressive Scan DVD

Activating progressive scan:

Check your TV has progressive scan

and connect with component video cable.

NOTE: If there is no picture or picture is distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

7	SEARCH AUDIO DUBBING	started
Note
• If your TV is compatible with Progressive
Scan (525p / 480p), you must use the		Recording
Component Video cable (commercially
available) to connect this unit to the TV.
(See Method 3 on page 14.) Make sure
the “P.SCAN” appears on the front panel

6

Using [{ / B], select “Yes”. Press [OK].

7

Using [K / L], select “Yes” in 15 seconds. Press [OK]. Your setting will be activated.

8

Press [SETUP] to exit.

display.
If not, use the video cable and set the
Progressive scan mode to “OFF” or	Playing
press and hold [SETUP] for more than
3 seconds during DVD playback, so that
the “P.SCAN” on the front panel display
disappears.	discs
• When selecting “No” or not pressing any

keys on the unit or remote control within 15 seconds at step 7, Progressive Scan remains to be “OFF” (interlace scan).

Still Mode (Default : Auto)

Set the type of still image in pausing playback. Select “Auto” usually.

Press [STOP C] if you are playing a disc.

STANDBY-ON

VIDEO/TV VCR DVD OPEN/CLOSE

Editing

1

Proceed to steps 1 to 3 above.

2

Using [K / L], select “Still Mode”. Press [OK].

3

Using [K / L], select a setting. Press [OK].

Your setting will be activated.

Auto : Optimum resolution setting (Field of Frame) will be selected.

Field : Images in the still mode will be stabilized.

Frame : Images in the still mode will be highly defined.

2

3

.@/: ABC

1 2

GHI JKL

4 5

PQRS TUV

7 8

CLEAR/C-RESET SPACE

0

RETURN

OK DISC MENU

CHANNEL

DEF

3

MNO

6

WXYZ

9

TITLE

DISPLAY

SETUP

	Changing the Setup menu
4	VCR
	functions

4

Press [SETUP] to exit.

Note	Others
up of 2 fields (There are 30 frame per
• Frame is 1 completed video image made

second of NTSC video).

EN