Magnasonic DVD816 Setup Options Information, System Setup, TV System, Screen Saver, Video

2)SETUP OPTIONS INFORMATION

A) SYSTEM SETUP

The SYSTEM SETUP options are illustrated below:

zTV SYSTEM

Adjust to change the Color System of the TV (Note that in North America the NTSC color system is used). You can choose from the following TV SYSTEM options.

AUTO : Choose this setting if your DVD player is connected to a multi-system TV.

NTSC : Choose this setting if your DVD player is connected to a NTSC TV.

PAL : Choose this setting if your DVD player is connected to a PAL TV.

PAL 60 : Choose this settings if your DVD player is connected to a PAL 60 TV.

zSCREEN SAVER

If the screen saver is on, when you DVD player is in STOP, OPEN or NO DISC state, or there is a frame frozen for more than 60 seconds, the screen saver will be displayed. This feature can protect your screen from image burn-in damage.

ON : Choose this setting to activate the screen saver.

OFF : Choose this setting to cancel the screen saver. The default setting is ON.

zVIDEO

INTERLACE-YUV : Choose this setting if your DVD player is connected to a TV with Y, Cb, Cr (Non- progressive Component) video cables.

TV-RGB : Choose this setting if your DVD player is connected to a TV with a S-VIDEO or composite (RCA) video cables.

P-SCAN YPBPR : Choose this setting if your DVD player is connected to a progressive scan TV with Y, Pb, Pr (Progressive Component) video cables.

PC-VGA : Choose this setting if your DVD player is connected to progressive scan TV with VGA video cable.

Page 18