JVC HR-XVC11B manual Moisture Condensation, About the Symbol Display, Symbol Used in this Manual

Page 5

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference.

This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.

Moisture Condensation

Never operate the unit immediately after moving it from a cold location to a warm location. Leave it unplugged for two or three hours without operating it. If you use the unit in such a situation, it may damage discs/tapes and internal parts.

About the Symbol Display

” may appear on your TV display during opera- tion and indicates that the function is not permitted by this unit or the disc.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Introduction

Symbol Used in this Manual

Note: Indicates special notes and operating fea- tures.

Tip: Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

ALL

All discs listed below

DVD

DVD and finalized DVD±R/RW

VCD

Video CDs

ACD

Audio CDs

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor pic- ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

5

Image 5
Contents HR-XVC11B HR-XVC12S Important for Laser Products Important Safety Instructions Contents Moisture Condensation About the Symbol DisplaySymbol Used in this Manual Regional Code Types of Playable DiscsDisplay Windows Front PanelAbout the Remote Control Remote ControlBattery installation Operation Range Skip DVD onlyC d Rear PanelOptional TV Connections Basic TV ConnectionsAudio/Video connection Component Video / Progressive Scan connectionCable/Satellite box Connection to unit Accessory Audio/Video A/V Connections to unitDigital Multi-channel sound Connection to an AmplifierGeneral Operation Initial Settings VCRGeneral Operation Initial Settings DVDDisplaying Disc Information on-screen Menu Language Display ModeDisc Audio / Subtitle / Menu TV AspectDolby Digital / DTS / Mpeg E. Black Level ExpansionSample Freq. Frequency Dynamic Range Control DRCRemote Control A/B/C Code Switching Remote Control FunctionVCR Tape Playback VCR Tape Recording Instant Timer RecordingCM Skip Commercial Skip To pause the recordingProgram Priority Manual Timer ProgrammingChecking or Erasing the Timer Program Timer-Link Recording External Timer Recording On-Screen Display VCR Copying from DVD to VCRVHS Quasi Playback Sqpb Additional VCR InformationVCR Auto Play System Buttons Operations Discs DVD Disc Playback General FeaturesAdditional features Programmed Playback Playing an Audio CDViewing a Jpeg file Playing a DVD VR format Disc Maintenance and ServiceReference Symptom Cause Correction TroubleshootingReference Specifications Warranty Only in U.S.A Memo Memo HR-XVC11B / HR-XVC12S