LG Electronics V194H owner manual Optional TV Connections, Resolution setting, Audio connection

Rear of TV

ANTENNA	VIDEO	AUDIO INPUT
INPUT	INPUT
		L	R

R V A1

Rear of DVD+VCR

C A2 S

Pr	Pb	Y	R	L
COMPONENT/PROGRESSIVE SCAN			AUDIO INPUT		S-VIDEO
	VIDEO INPUT

INPUT

Rear of TV

Optional TV Connections

These connections support only DVD playback. The tuner and VCR still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jacks.

Audio connection

Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on the TV using the supplied audio cables (A2).

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+VCR to the S-Video in jack on the TV using the optional S-Video cable (S).

Note:

For S-Video connection, resolution must be set to 480i or 480p, however S-VIDEO OUT is always at 480i standard resolution.

Component Video / Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD+VCR’s progressive scan output for the highest video resolution possible.

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD+VCR to the corre- sponding in jacks on the TV using an optional Y Pb Pr cable (C).

Notes:

•The 480p and 720p resolutions are Progressive scan applied resolutions.

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack and S-VIDEO OUT jack).

Resolution setting

The resolution setting support only DVD playback.

1.Before you set the resolution, this unit must be in stop mode. Press STOP to stop playback.

2.Press RESOLUTION once. The current resolution setting will be appears in the display window.

3.Press RESOLUTION repeatedly to change the resolution you want.

The available resolution according to the connections are as shown below.

OUTPUT	Available
CONNECTIONS	Resolutions
HDMI	1920 x 1080i
VIDEO OUT	1280 x 720p
	720 x 480p
COMPONENT	1920 x 1080i
	1280 x 720p
VIDEO OUT	720 x 480p
	720 x 480i
VIDEO OUTi	720 x 480i
S-VIDEOi	720 x 480i

Note:

•For 720p and 1080i resolution on the component video out, only non-copy protected discs can be played back.If the disc is copy protected, it will be displayed at the 480p resolution without HDMI cable connection. With HDMI cable connection, the picture may not be displayed properly

•If your TV does not support the resolution you have set, the picture may not be displayed properly. Please read TV’s owner’s manual then set the resolution that your TV can accept.

12