6.2 Mask Level
A mask is created when Underscan feature which reduces the output image size to less than the maximum display size. Typically Underscan is used if the image goes beyond the display.
The mask level can be adjusted from 0 IRE (black) to 100 IRE (white) with a slider bar control. The default setting is 0 IRE.
This control is available in the Output Setup menu.
Main Menu > Output Setup > Mask Level
6.3 Output HDCP
HDMI displays or other devices (such as HDMI splitters, AV Receivers) may have different HDCP implementations. The output HDCP Mode control is added to accommodate the large number of HDMI devices that connect to the iScan Duo’s outputs.
This control is available in the Output Setup menu.
Main Menu > Output Setup > HDCP Mode
Auto | HDCP content protection is applied to the iScan |
| Duo output only if the input signal is protected |
On | HDCP content protection is always applied to the |
| iScan Duo output if the Duo detects a display with |
| HDCP even if the input signal is unprotected |
7. Updated Serial Automation commands
New commands are added to support CMS and other new features including
∙CMS commands
oInput and Output Chromaticity controls o Color Gamut controls
o Gray Scale controls
∙Product Name and Version Number queries
∙Y/C Delay, CUE Correction, Border and Mask Levels
062210 | 9 |