GoVideo HT2010 One-Touch Recording, Checking the Recording Time, Extending the Recording Time

Insert VHS Tape

Insert a blank VHS video tape into the VCR deck.

VCR Operation (Continued)

One-Touch Recording

One-Touch Recording allows you to quickly make a recording of a preset length without using the program timer.

Before you begin:

Power on the DVD+VCR and the TV.

Be sure the TV is tuned to the DVD+VCR output channel (3 or 4). If a direct AUDIO/VIDEO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.

1	Insert a video cassette with the record safety
	tab intact.
2	Select the desired channel by using CH/TRK
	(v/V) or number (0-9).
	The channel number appears on the TV screen.
	If you are recording from an external source via the
	audio/video input jacks, select LINE1 (rear jacks) or
	LINE2 (front jacks) by pressing INPUT.
	Set the desired recording speed (SP or EP) by
3 pressing SP/EP.
	The tape speed will appear on the TV screen.
4	Press REC/OTR (z) twice.
	The One-Touch Record menu will appear on the TV
	screen.
	Recording will start and the TIMER indicator will light.
	Press REC/OTR (z) repeatedly to select the
5 recording time length.
	At the end of the recording, the DVD+VCR will stop
	recording and shut off.
	During One-Touch Recording, changing the channel on
	the DVD+VCR will not be possible.
	You can stop the recording by pressing STOP (x).
ONE-TOUCH RECORD			0H30M	..... 9H00M ➝ 0H00M
CHANNEL		2
SPEED		SP		Length Display
START		NOW	(each additional press of
			REC/OTR (z) increases record-
LENGTH		0H30M

ing time 30 minutes)

Checking the Recording Time

Press REC/OTR (z) once to check the recording time. The recalled setting will be displayed for 6 seconds and then return to the TV automatically.

Extending the Recording Time

The recording time can be extended anytime by press- ing REC/OTR (z).

Subsequent presses will increase the recording time in 30-minute increments.

otes

If you press PAUSE/STEP (X) during One-Touch Recording, the DVD+VCR will enter record pause mode. One-Touch Recording will be cancelled.

If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to normal recording mode.

Dubbing and Editing

If you wish to edit or dub recordings from your cam- corder (or another VCR) to this DVD+VCR, connect your device to the line inputs on the front or rear pan- els. These direct A/V jacks will provide better picture results than using the RF jack on the rear panel.

1	Connect the camcorder’s (or another VCR’s) A/V
	outputs to the DVD+VCR as illustrated on page 14.
2	Press INPUT to select LINE 1 (rear) or LINE2
	(front).

3 Play the tape in the camcorder (or another VCR). If you have a TV attached to your DVD+VCR, you can see the video playing.

4 When you are ready to begin recording, press the DVD+VCR’s REC/OTR (z) button once to start.

ote

Before recording, please confirm the recording start position.

Copying from DVD to VCR

The DVD+VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button.

ote

If the DVD you are attempting to copy is copy protect- ed, you will not be able to copy the disc (“LOCK” is displayed on the front panel display). It is not permit- ted to copy Macrovision encoded DVDs.

1 Insert Disc

Insert the disc you wish to copy in the DVD deck and close the disc tray.

2

3 Press the COPY button on the front panel. The DVD will go into play mode and the VCR will go into record mode.

If the DVD disc menu appears, you may need to press PLAY (N) manually to begin copying.

4 Stop the Copy Process

When the DVD is finished playing, press VCR on the remote control and then press STOP (x) to end the copy.

You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.

ote

When you stop the DVD playback during copying, the record- ing on VCR is stopped automatically.

28