Emerson EWD2004 owner manual Information Troubleshooting Guide, Green VCR Output light is lit

Page 23
Playback picture is partially noisy.
Cannot view a tape but the audio is OK.
No, or poor, playback picture.
TV programs cannot be seen normally.

Information

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the follow- ing checklist.

 

 

 

PROBLEM

CORRECTIVE ACTION

 

 

 

No power.

• Make sure the power plug is connected to an AC outlet.

 

D

 

 

• Make sure the power is turned on.

 

V

 

 

 

 

 

This unit does not respond to

• Check if the power plug is connected to an AC outlet.

 

D

 

the remote control.

• Check the batteries in the remote control.

 

 

 

 

• Aim the remote control directly at the remote sensor. If necessary, remove all the

 

V

 

 

obstacles between the sensor and the remote.

 

C

 

 

• You have to be within 23 feet of this unit.

 

R

 

 

• Check if the right mode is selected. If it’s not in the right mode, press the DVD or

 

 

 

VCR buttons, whichever you need, on the remote control.

 

 

 

 

 

 

 

 

• Check if a cassette tape is in this unit.

 

 

 

 

• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the vol-

 

 

 

 

ume up, then. If you hear some signal sound from the radio in response to your

 

 

 

 

pressing buttons on the remote, the remote control is working.

 

 

 

Timer recording is impossible.

• Make sure the timer recording is set correctly.

 

V

 

 

• Make sure the TIMER REC light appears on the DVD/VCR. If not, press the SUBTI-

 

C

 

 

TLE/T-SET button.

 

R

 

 

• Make sure the VCR clock is set correctly.

 

 

Cannot go into Record mode.

• Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

 

 

 

 

 

 

• Activate this unit in VCR mode. Press the VCR button on the remote control so that the

 

 

 

 

green VCR OUTPUT light is lit.

• Adjust tracking control for a better picture by pressing the CHANNEL (K/L) buttons on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control.

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .

• Make sure the VCR is not in the Menu mode.

• Change the RF output channel to CH4. Then select the same channel on the TV.

• Fine tune your TV.

• Re-check the ANT. IN and ANT. OUT connections. See the front page and page 6.

• Press the VCR/TV button.

•Press the VCR button on the remote control to activate it in the VCR mode. Check if the green VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.

Video or color fades in and out when • You cannot copy a copyrighted video tape. You are experiencing copy guard protection. making a copy of a video tape.

 

 

 

Cannot remove the tape.

• Check if this unit is in the VCR mode. If not, press the VCR button on the remote control

 

 

 

 

to switch the mode.

 

 

 

No picture.

• Connect the video cables firmly.

 

D

 

V

 

 

• Insert a correct video disc that plays on this unit.

 

 

 

• Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then

 

D

 

 

try other DVD features.

 

 

 

Disc cannot be played.

• Insert the disc.

 

 

 

 

• Clean the disc.

 

 

 

 

• Place the disc correctly with the label side up.

 

 

 

 

• Cancel the parental lock or change the control levels.

 

 

 

 

• Handle a disc with special care so that it does not have fingerprints, scratches, or

 

 

 

 

dusts on its surface.

 

 

 

No sound.

• Connect the audio cables firmly.

 

 

 

 

• Turn the power of the audio component on.

 

 

 

 

• Correct the audio output settings.

 

 

 

 

• Correct the input settings on the audio component.

 

 

 

No DTS audio is output.

• This unit does not support DTS audio. This is not a malfunction.

 

 

 

Distorted picture.

• Connect this unit directly to the TV.

 

 

 

 

• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

 

 

 

 

• Although pictures may stop for a moment, this is not a malfunction.

 

 

 

Audio or subtitle language

• The selected language is not available for audio or subtitles on the DVD.

 

 

 

does not match the set up.

This is not a malfunction.

 

 

 

The camera angle cannot be

• The DVD does not contain sequences recorded from different camera angles.

 

 

 

changed.

This is not a malfunction.

 

 

 

Audio or subtitle language

• The DVD does not contain audio source or subtitles in the selected language.

 

 

 

cannot be changed.

This is not a malfunction.

 

 

 

“Prohibited icon” appears on the • That operation is prohibited by this unit or the disc.

 

 

 

screen, prohibiting an operation

This is not a malfunction.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

•Playback from a desired track and random playback are not available during program playback.

•Some functions are prohibited on some discs.

Information

– 23 –

EN

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Basic TV Connection / Conexión básica del televisor Table of ContentsMake your contribution to the environment PrecautionsLaser Safety Important Safeguards Moisture Condensation Warning Installation LocationMaintenance Avoid the Hazards of Electrical Shock and FireHint Setup About the Video Cassettes and DiscsConnections Analog Hint for Cable Box or Satellite BoxConnection to an Audio System Digital audio input jackMethod Connection to a TVFront & Rear Terminals Installing the Batteries for the Remote Control About the Remote Control and Front PanelRemote Control VCR/DVD Switching Turn on the unit for the first time Preset for UseClock Set Up Other Operations VCR Functions PlaybackRecording & OTR One Touch Recording On-Screen Operations Recording FeaturesTimer Recording To Check, Correct, or Cancel a Timer ProgramBegin playback of the tape in another source Hint for Timer RecordingCopying a Video Tape Insert a pre-recorded tape into the playing VCRIndex Search Special FeaturesHint for Timer Search & Index Search Time SearchDVD Functions Playback On-Screen Display Search Function Marker SetupRandom Playback Repeat / Random / Programmed PlaybackRepeat Playback Repeat A-B PlaybackSpecial Settings Custom Menu DVD Set UpQuick Setup Menu Language SettingMinutes of no use Display SettingAudio Setting See Hint to the rightParental Levels To Change the Password for Parental ControlsParental Setting If you have set a password alreadyGreen VCR Output light is lit Information Troubleshooting GuideTo switch the mode Try other DVD featuresLanguage List SpecificationsLimited Warranty Español Sección RF Output Channel Mando a distanciaAntes Encienda el televisor y cambie al canal Quick Use Guide Installing the BatteriesFor the Remote Control VCR/DVD SwitchingIf channel 3 is already occupied for broadcasting, see RF VCR Playback DVD/CD Playback1VMN20189 / H9612UD Able are set to the correct channel

EWD2004 specifications

The Emerson EWD2004 is an advanced electronic digital thermometer designed to deliver precision and reliability in temperature measurement across various applications. This device stands out due to its innovative features, robust construction, and user-friendly design, making it a preferred choice among professionals in both industrial and laboratory settings.

One of the main features of the EWD2004 is its wide temperature range, which allows for accurate readings from -50°C to 200°C. This versatility makes it suitable for a vast array of applications, including food processing, HVAC systems, and chemical laboratories. The device employs cutting-edge sensor technology to ensure minimal response time and high accuracy, with an impressive resolution of 0.1°C.

The EWD2004 is equipped with a large, easy-to-read LCD display, providing clear visibility of the readings even in low-light conditions. The backlight feature enhances usability further, allowing for operation in various environments. Additionally, the design incorporates intuitive controls that facilitate quick adjustments and data retrieval, ensuring that users can efficiently navigate through its functions.

Another significant aspect of the Emerson EWD2004 is its data logging capability. This feature enables users to record temperature readings over time, which can be crucial for maintaining compliance with safety and quality standards. The data can be easily transferred to computers or other devices, allowing for detailed analysis and reporting.

Durability is also a vital characteristic of the EWD2004. Built with high-quality materials, the thermometer is resistant to impact and moisture, making it suitable for rugged environments. Its ergonomic design ensures comfortable handling, while the protective casing safeguards against accidental drops and spills.

Furthermore, the EWD2004 includes advanced calibration features, allowing users to perform adjustments effortlessly and maintain accuracy over time. This is especially beneficial in settings where temperature control is critical.

In summary, the Emerson EWD2004 combines precision, usability, and durability, making it an essential tool for professionals in various sectors. With its robust features, advanced technologies, and commitment to accuracy, the EWD2004 meets the demands of modern temperature measurement, ensuring efficient and reliable performance in any application.
Top Page Image Contents