Emerson CEDV800D owner manual For TVs with S-VIDEO Input Jack

CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT JACK OR

COMPONENT VIDEO IN JACKS

FOR TVs WITH S-VIDEO INPUT JACK

Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pic- tures.

The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBINATION UNIT. Therefore, in order to use the VCR features or view TV channels on the DVD/VCR COMBINATION UNIT, you still need to either connect the RF cable between the ANT-OUT jack of the DVD/VCR COMBINA- TION UNIT and the TV’s Antenna In jack, or connect the yellow video cable as described earlier (Fig.1). To connect the supplied RF cable, see page 13.

A/V-compatible or wide screen TV

DVD/VCR	VCR	DVD
AUDIO OUT	AUDIO IN	S-VIDEO COMPONENT AUDIO	DIGITAL
		OUT VIDEO OUT OUT	AUDIO OUT

ANT-IN

L	L	Y
R	R	Cb	L
ANT-OUT VIDEO OUT	VIDEO IN		COAXIAL
		Cr	R
To S-VIDEO INPUT jack		To S-VIDEO OUT jack
To Right (red) and Left (white)
To AUDIO INPUT jacks		To AUDIO OUT jacks

[Fig. 2]

FOR TVs WITH COMPONENT VIDEO IN JACKS

Use a component video cable (commercially available) in place of the yellow DVD/VCR video cable and S- VIDEO jack to enjoy higher quality pictures.

The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBI- NATION UNIT. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR COMBI- NATION UNIT, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR COMBINATION UNIT and the TV’s Antenna In jack, or connect the yellow VCR video cable as described earlier (Fig. 1). To connect the supplied RF cable, see page 13.

A/V-compatible

or wide screen TV

To Right (red) and Left (white)	To Right (red) and Left (white)
AUDIO INPUT jacks	AUDIO OUTPUT jacks

	DVD/VCR	VCR		DVD
	AUDIO OUT	AUDIO IN	S-VIDEO COMPONENT		AUDIO	DIGITAL
			OUT	VIDEO OUT	OUT	AUDIO OUT
ANT-IN	L	L
				Y
	R	R		Cb	L
ANT-OUT	VIDEO OUT	VIDEO IN				COAXIAL
				Cr	R

To COMPONENT VIDEO	To COMPONENT VIDEO	[Fig. 3]
INPUT jacks	OUT jacks

CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial digital cable (commercially available) for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

(Stereo Receiver) Amplifier equipped with digital

input jacks, MD deck, DAT deck, etc.

Notes

DVD/VCR	VCR	DVD
AUDIO OUT	AUDIO IN	S-VIDEO COMPONENT	AUDIO	DIGITAL
		OUT VIDEO OUT	OUT	AUDIO OUT
ANT-IN	L
L		Y
R	R	Cb	L
ANT-OUT VIDEO OUT	VIDEO IN			COAXIAL
		Cr	R

To COAXIAL DIGITAL AUDIO INPUT jack	To COAXIAL DIGITAL	[Fig. 4]
	AUDIO OUT jack

¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

¡Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD disc using incorrect set- tings may generate noise distortion, and may also damage the speakers. (See page 29 to set DOLBY DIGITAL to OFF.)

– 14 – EN

1L25