Specifications, Video | Extron electronic CVEQ 100 D specs

specifications

Gain	Composite video and Y of S-video: -1 dB to +3
	dB (x0.9 to x1.4), adjustable C of S-video: 0dB
	to +10 dB (x1 to x3), adjustable
Equalization	0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable
Bandwidth (Y of S-video)	185 MHz (-3 dB)
Output cable driving distance	Up to 1000’ (300 m) with Extron MHR cable

Number/signal type
CVEQ 100 D	1 composite video
SVEQ 100 D	1 S-video
Connectors
CVEQ 100 D	1 female RCA
SVEQ 100 D	1 female 4-pin mini DIN
Nominal level	1 Vp-p for Y of S-video, and for composite
	video (including sync)
	0.3 Vp-p for C of S-video
Minimum/maximum levels
CVEQ 100 D	0.4 to 2.0 Vp-p with no offset at unity gain
SVEQ 100 D	For Y: 0.4 to 2.0 Vp-p with no offset at
	unity gain
Impedance	75 ohms
Return loss	<-25 dB @ 0 to 5 MHz
DC offset (max. allowable)	4.0 V
Input coupling	AC

Number/signal type
CVEQ 100 D	1 composite video
SVEQ 100 D	1 S-video
Connectors
CVEQ 100 D	1 female BNC
SVEQ 100 D	2 female BNC
Nominal level	1 Vp-p for Y of S-video, and for composite
	video (including sync)
	0.3 Vp-p for C of S-video
Minimum/maximum levels	0.4 to 2.0 Vp-p (follows input)
Impedance	75 ohms
Return loss	-30 dB @ 5 MHz
DC offset	±5 mV with no input signal

Floating: +0.1 to -0.6 V, depending on input signal content

Sync

Standards............................................ NTSC 3.58, NTSC 4.43, PAL, SECAM

Gain	Unbal. output: 0 dB; bal. output: +6 dB
Frequency response	20 Hz to 20 kHz, +0.05 dB, -0.0 dB
THD + Noise	0.015% @ 1 kHz at nominal level
S/N	>100 dB at maximum output (unweighted)
Stereo channel separation	>80 dB @ 1 kHz
Output cable driving distance	Up to 1000’ (300 m) with Extron
	RG-6 SHR cable

Number/signal type	1 stereo or dual mono (switch-selectable),
	balanced/unbalanced
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced

Nominal level	-10 dBV (316 mVrms), unbalanced; -2 dBu
	(632 mV), balanced output
Maximum level	+8 dBV (2.5 V) unbalanced, +14 dBu (5.6 V
	balanced at 1% THD+N with a 10k ohm load

External power supply		100 VAC to 240 VAC, 50/60 Hz, external,
		autoswitchable; to 12 VDC, 1 A, regulated
Power input requirements		12 VDC, 0.2 A
Temperature/humidity		Storage: -40 to +158 °F (-40 to +70 °C) / 10%
		to 90%, noncondensing
		Operating: +32 to +122 °F (0 to +50 °C) / 10%
		to 90%, noncondensing
Cooling		Convection, unvented
Rack mount		No, but wall- and furniture mountable.
Enclosure type		Metal rear enclosure, plastic faceplate
Enclosure dimensions
Faceplate		2.6" H* x 1.3" W x 0.1" D	(6.6 cm H* x 3.3 cm
		W x 0.3 cm D) (Fits the opening in a 1 gang
		Decora faceplate. *Height is 3.8" [9.7 cm]
		including mounting tabs.)
Device		2.7" H x 1.8" W x 0.75" D (6.9 cm H x
		4.6 cm W x 1.9 cm D) (Depth excludes
		connectors, height excludes mounting tabs.)
Product weight		0.2 lbs (0.1 kg)
Shipping weight		2 lbs (1 kg)
Vibration		ISTA 1A in carton
		(International Safe Transit Association)
Listings		UL, CUL
Compliances		CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF		30,000 hours
Warranty		3 years parts and labor
NOTE: All nominal levels are at ±10%.
Model	Version Description		Part Number
CVEQ 100 D	Video and Audio Line Driver - Decora		60-867-01
SVEQ 100 D	S-video and Audio Line Driver - Decora		60-868-01

Specifications are subject to change without notice.