Porter-Cable DVP 3100V user manual Before Operation VCR part, Tuning in a video channel on your

Press 1on the remote control to enter the standby mode (the clock indicator will be dimmed).

Press and hold CHANNEL 3 or 4 on the DVD+

VCR for more than 4 secs.

English

Before Operation - VCR part

Tuning in a video channel on your

TV

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable.

If you have used a SCART lead you will not have to tune your TV, simply select the AV channel.The AV channel is already pre-tuned for optimum video playback on your TV.

Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa.

1 Turn on DVD+VCR and TV.

2 Set the vacant position 36 on your TV.

3

4

RF 36 will appear in the DVD+VCR display.

The following picture will be displayed on the TV screen.

RF CHANNEL 36

If the picture is snowy, move to step 5. If the picture is clean, press 1 on the DVD+VCR to finish.

5 Press CHANNEL 3 or 4 on the DVD+VCR to set the video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area.

Note

The RF channel will not change until step 6 has been executed.

6 Press 1to store the new RF video channel into the DVD+VCR memory.

Now tune your TV set to the new DVD+VCR RF channel.

Note

If the TV picture was clear in step 4, do not retune your TV.

Using your DVD+VCR for the very first time

For the following steps we assume that you have just connected your DVD+VCR for the very first time.

To make tuning TV stations an easy task your DVD+VCR incorporates the Automatic Channel Memory System (ACMS).This system will automatically tune, store TV channels in your DVD+VCR.

1 Make sure that you have correctly installed your DVD+VCR.

Press 1 to turn on your DVD+VCR.

If the initial Menu Screen doesn’t appear on screen, make sure that you have tuned your TV to a video channel. Or if this is correct it may mean that your DVD+VCR is already tuned.

	ACMS
Pr-12	OK i
ACMS

2 Press OK to start the automatic tuning process.

01	C02	00
02	C03	00
03	C04	00

S	E
Pr-12	i
ACMS

3 Press SYSTEM MENU to remove the menus from the TV screen.

12