SIIG 04-0680B installation instructions

Page 4

1.Install the C Clamp (b) to the 35mm Tube Support (a) according to the thickness of the desktop. The thickness can be changed in three positions. Connect it using 2 M10x15 Bolts (i) and tighten using the Allen Key (j). Tighten the C Clamp to the desktop using the 2 eye bolts.

4

Image 4
Contents 04-0680B Safety Information UnpackingInstallation Parts ListTools Required Page Page Flat Back Monitor Curved Back Monitor Adjust the height and install the Wire Clips Check Tightness Arrange Cables Blank Technical Support and Warranty SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA #About SIIG, Inc Product Name