Clarion VMA5096, VMA7196 owner manual Wiring the monitor, Procedure

Page 15

Wiring the monitor

Precautions

•Disconnect the negative battery terminal before making any wiring connections.

•Be particularly careful where you route wires. Keep them away from the engine, exhaust system, etc. Heat may damage wires.

•If the fuse should blow, make sure all connections are correct and no wires are damaged before replacing the fuse. Always use fuses that are the same amperage value as the original. When replacing a fuse, never let the battery side touch any metal part or any other wire.

WARNING!

Be sure to disconnect the battery (-) terminal before starting.

This is to prevent short circuits during installation.

Car battery

Procedure

1.Disconnect the negative (-) lead from the vehicle’s battery.

2.Find a place in the vehicle for the video source(s).

3.Create passage holes for the power and video cables.

When drilling through metal or plastic, use grommets to protect the cables from sharp edges that could penetrate the insulation and cause a short circuit and device failure.

4.Connect the ground lead (black) securely to a clean metal plate on the vehicle.

Use sand paper to remove any paint from the surface where you attach the ground terminal.

5.Reconnect the negative (-) lead to the battery.

English

VMA5096/VMA7196

15

VMA5096_VMA7196_OwnersManual_rev.pmd.p65 15

11/23/05, 2:54 PM

Page 14 Page 16
Image 15
Page 14 Page 16
Contents VMA5096 VMA7196 FCC Approval EnglishContents Features Precautions InstallationPlease Note Controls Wireless headphonesTurning the unit on and off OperationsPlaying a video or game Adjusting the picturePlaying two videos or games at once Switching between video sourcesConnecting a video source Changing the video region mode NTSC/PALDisabling automatic power on Returning adjustments to the factory settingsWhat is included in the box Operations of AccessoriesInstallation and Wiring Using a remote controlBefore starting Installing the monitorBezel Flush mounting in the headrestRemoving the monitor from the bezel Custom mounting using the threaded insertProcedure Wiring the monitorIR connector polarity Connections diagramMonitor connections Picture rolls or appears B/W Monitor does not turn onNo picture Screen is darkVMA7196 Monitor Specifications VMA5096 General SpecificationsVMA5096 Monitor Specifications VMA7196 General SpecificationsLimited Warranty Information Clarion Corporation of America

VMA7196, VMA5096 specifications

The Clarion VMA5096 and VMA7196 are both advanced multimedia receivers designed to enhance in-car entertainment through modern technology and user-friendly interfaces. These two models stand out in the marketplace, offering exceptional features tailored to the needs of today's drivers and passengers.

The Clarion VMA5096 comes equipped with a full-color 5.0-inch touchscreen display, providing easy navigation and access to a variety of functions. It supports both Bluetooth connectivity for hands-free calling and audio streaming, which allows users to connect their smartphones effortlessly. Additionally, a built-in USB port enables users to connect and charge their devices while enjoying their favorite music and media from multiple sources, including Pandora and Spotify.

One of the prominent technologies in the VMA5096 is the customizable user interface, which allows users to tailor the display to their preferences. Moreover, the model features a multi-zone output, permitting different audio settings for various areas of the vehicle, enhancing the overall experience for all passengers. The receiver also integrates seamlessly with rear-view cameras, ensuring safety while reversing.

On the other hand, the Clarion VMA7196 takes functionalities a step further with a larger 7.0-inch touchscreen display, providing more screen real estate for navigation and media control. It offers similar Bluetooth capabilities as the VMA5096 but enhances the experience with advanced voice recognition technology, allowing for hands-free operation without needing to take your eyes off the road.

The VMA7196 features support for high-definition video playback, ensuring that both driver and passengers can enjoy crystal-clear visuals during stops or while the vehicle is parked. Its multi-color display also enhances visibility and aesthetics, making it a stylish addition to any car interior.

Both models are designed with a focus on sound quality. They feature built-in amplifiers that ensure powerful audio output, while the equalizer settings allow users to adjust sound characteristics to suit their individual preferences. With support for various audio formats, these devices cater to a wide range of media collections.

In summary, the Clarion VMA5096 and VMA7196 are notable for their user-centric features, advanced connectivity options, versatile media playback abilities, and safety enhancements. They are ideal solutions for anyone looking to upgrade their in-car entertainment experience.
Top Page Image Contents