Operation

BASIC OPERATION

TURN ON THE UINT

Press the POWER button on the remote control to switch on the power. The power indicator will light up in green colour, press the POWER button again to switch off the power, and the indicator will change to red.

CHANNEL SEARCH

Press the SOURCE button on the remote control to select the TV or DTV input mode, and press the OK button to confirm.If you are using the unit for the first time, an Installation Guide menu will be displayed to guide you through the channel scan, Use the remote control to finish channel scan (you can also refer to CHANNEL MENU (page 16) in this manual for the channel scan operation).

NEW INSTALLATION

	Menu Language	English
	Auto Tuning
EXIT	MENU	OK

WATCH TV PROGRAM

Press the CH- or CH+ button to select the previous or next channels or press the 0-9 buttons to enter a channel number directly.Press CH.LIST button to view the channels

list and press the buttons to select the desired TV programmes.

CHANGE VOLUME

Press the VOL - or VOL + button to adjust the volume level. Press the VOL - button repeatedly to decrease the volume; press the VOL + button repeatedly to increase the volume from 0 to 100.

CHANGE PICTURE MODE

Press the PIC button repeatedly to cycle through the available video picture modes.

CHANGE SOUND MODE

Press the SOUND button repeatedly to cycle through the available sound modes.

VIEW CHANNEL INFORAMTION

Press the INFO button to display the preset channel information.

MUTE

Press the MUTE button to cut off the sound output, press this button again to resume sound output.

CHANGE INPUT SOURCE

Press the SOURCE button then press the buttons to select the input source and press the OK button to confirm.

-13-