LG Electronics SAC33575901 Watching TV / Channel Control, Turning on TV, Channel Selection

WATCHING TV / CHANNEL CONTROL

TURNING ON TV

Turning on TV just after installation

WATCHING TV / CHANNEL CONTROL

1First, connect power cord correctly.

At this moment, TV is in standby mode.

■In standby mode to turn TV on, press the INPUT, CH (D or E ) button on the TV or press the POWER, INPUT, CH( or ), Number (0~9) button on the remote control.

2Select the viewing source by using the INPUT button on the remote control.

■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.

Turning on TV in use (power cord is still connected)

Case 1) Press the POWER button on the remote control. The TV reverts to standby mode.

-To turn TV on, press the INPUT, CH (D or E) button on the TV or press the POWER, INPUT, CH( or ), Number (0~9 ) button on the remote control.

You can press the main power to shutdown the TV from standby mode to use even less power that standby mode.

Case 2)	Main power(		) on the TV is switched off.
	- To turn TV on, you must press the main power (			) button on the TV.
Case 3)	Press the POWER button on the remote control and then main power(				) on the TV is switched off.
	- To turn TV on, you must press the main power (			) button on the TV.
! NOTE		G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

G If you unplug the TV once or turn the main power off, the clock function reset.

CHANNEL SELECTION

1 Press the CH ( or ) or NUMBER buttons to select a channel number.

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.

1

2

3

Press the VOL (+ or -)button to adjust the volume.

If you want to switch the sound off, press the MUTE button.

You can cancel the Mute function by pressing the MUTE or VOL (+ or -)button.

34