Installation
How to connect
Connect the audio and video cables from the external
equipment's output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
How to use
1.Select the input source by using the TVNIDEO button on the remote control. (If connected to A/V INPUT 1, select Video 1 input source).
2.Operate the corresponding external equipment. Refer to external equipment operating guide.
How to connect
1.Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the fig- ure.
2.If your DVD only has an
the AUDIO INPUT jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output,
use
How to use
1.Turn on the DVD player, insert a DVD.
2.Use the TVNIDEO or MULTIMEDIA button on the remote control to select Component 1 or Component 2. (If connected to S- VIDEO, select the Video 1 or Video 2 external input source.)
3.Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the compo- nent input ports as shown below.
Component | ports |
|
on the | TV | imiiii ii_iii_iii_iii_iii_iiii iii_iii_iii_iii_iii_iii_iii_iii |
|
|
onVideoDVDoutputplayerports
Z
]._Camcorder
Video Game Set
or
DVD
14 Plasma TV