LG Electronics SAC30708022 External Equipment Setup, HD Receiver Setup, Component Connection

EXTERNAL EQUIPMENT SETUP

■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

EXTERNAL

19/22LG3**

1. How to connect

Y PBPRL R

EQUIPMENT SETUP

1Connect the video outputs (Y, PB, PR) of the digital set- top box to the COMPONENT IN VIDEO jacks on

the TV. Match the jack colors (Y = green, PB = blue, and PR = red).

					1	2
	2	Connect the audio output of the digital set-top box to				ANTENNA/CABLE IN
		the COMPONENT IN AUDIO jacks on the TV.
2. How to use			IN	AUDIO IN		AV IN
					S-VIDEO
				(RGB/DVI)		VIDEO	AUDIO
■ Turn on the digital set-top box.						L(MONO)
	(Refer to the owner’s manual for the digital set-top box. operation)			IN
	INPUT button on the remote control.			COMPONENT	VIDEO		AUDIO
■	Select the Component input source on the TV using the					L	R
			IN
			NLY)

Supported Resolutions			Y, CB/PB, CR/PR
Signal	Component	HDMI	Resolution	Horizontal	Vertical
				Frequency(KHz) Frequency(Hz)
480i	Yes	No		15.73	59.94
			720x480i
480p	Yes	Yes		15.73	60.00
720p	Yes	Yes	720x480p	31.47	59.94
				31.50	60.00
1080i	Yes	Yes
1080p	Yes	Yes	1280x720p	44.96	59.94
				45.00	60.00
			1920x1080i	33.72	59.94
				33.75	60.00
				27.00	24.00
			1920x1080p	33.75	30.00
				67.43	59.94
				67.50	60.00

18