Installation
Installation Instruction
Rear A/V Cover
*The connection panel is hidden behind the A/V cover. a. Remove the cover.
b. Install wires as necessary.
c. Reinstall the cover. Position the A/V cover with the TV back panel, tilt it back as shown.
d. Align the holes on the TV back panel with the two tabs on the rear A/V cover and insert.
e. Close cover.
Adjusting the TV Viewing Angle
-You can adjust the vertical angle of the TV between 3° and 12°.
12 
3
Wire Holders
-Thread, then pull the wires through the hole on the TV stand.
Swivel Stand
-The TV can be conveniently swiveled on its stand
25°
Installation on the Wall
-An optional wall mount is available for this TV, see your dealer.
For installation, follow the instructions provide with the optional wall mount.
10