![](/images/new-backgrounds/1126385/12638541x1.webp)
Operation
Screen Menu Options
Auto Adjustment
-RGB (PC) mode only; This function doesn’t work for
-Automatically adjusts picture position and minimizes image shaking.
-After adjustment, if the image is still not correct, your Monitor is functioning properly but needs further adjustment.
-The Auto config. and Manual config. are not active in DVI mode.
1. | Press the MENU button and then use D / E button to select the SCREEN menu. |
|
|
|
| |
|
| SCREEN |
| |||
2. | Press the G button and then use D / E button to select Auto config.. |
|
|
|
| To set |
|
|
| Auto config. G | |||
3. | Press the G button to run Auto configure. |
|
|
| ARC |
|
|
|
|
| |||
|
|
|
|
| Zoom in/out |
|
| • When Auto config. has finished, OK will be shown on screen. |
| Position |
| ||
| • If the position of the image is still not correct, try Auto adjustment again. |
|
|
| Manual config. |
|
|
|
|
|
| ||
|
|
|
|
| Screen adj. |
|
4. | In RGB (PC) mode, if the image needs to be adjusted more after using Auto con- |
|
|
| ||
|
| Reset |
| |||
| fig., you can make further adjustments with the Manual config. option. |
|
|
| VGA Mode |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MENU Prev. |
|
|
|
|
|
|
|
|
Setting Picture Format
-Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
-Set every aspect ratio for RGB 480p, DVI 480p, Component 480i/480p, Video, and
-Use 4:3, or 16:9 for other input sources.
1. Use the ARC button repeatedly to select the desired picture format. You can also adjust ARC in the SCREEN menu.
•4:3
-Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides.
•16:9
- Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
•Horizon
-Choose Horizon when you want to adjust the picture in a
•Zoom
-Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
Picture Size Zoom
- When enlarging or reducing the picture, the image may become distorted.
1.Use ZOOM+/ZOOM- button to enlarge or reduce the picture size.
•Zoom adjustment range is 100~300.
2.Adjust the main picture position using the D / E / F / G buttons while in the enlarged picture mode.
Zoom out
100%
D
F E G
21