LG Electronics RU-15LA70C owner manual IR Codes, How to Connect, Remote Control IR Code

Page 29

IR Codes

How to Connect

GConnect your wired remote control to the Remote Control port on the Monitor.

Remote Control IR Code

GOutput waveform

Single pulse, modulated with 37.917KHz signal at 455KHz

GConfiguration of frame

•1st frame

Carrier frequency

FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3

Lead code

Low	High
		Data code	Data code
custom code	custom code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

•Repeat frame

Repeat code

GLead code

9 ms

GRepeat code

9 ms

GBit description

• Bit “0”

0.56 ms

1.12 ms

GFrame interval : Tf

4.5 ms

0.55 ms

2.25 ms

• Bit “1”

0.56 ms

2.24 ms

The waveform is transmitted as long as a key is depressed.

Tf=108ms @455KHz

Image 29

Contents LCD Regulatory Information Important Safety Instructions Safety InstructionsOn Disposal Safety InstructionsContents Controls IntroductionConnection Options Installing Batteries Remote Control Key FunctionsCH D / E Channel button VOL F / G Volume button Number buttonsKensington Security System InstallationAccessories Rear A/V Cover Wire HoldersAdjusting the TV Viewing Angle Connecting to an Outdoor Antenna Setup Connecting to an Inside Antenna SetupExternal Equipment Connections Antenna ConnectionCable TV Setup VCR SetupExternal A/V Source Setup Cable BoxPC Setup Using HeadphonesMonitor Display Specifications Resolution Horizontal VerticalPC Menu Options OperationMenu Language Selection TV Operation OverviewChannel Menu Options Favorite Channels SetupMemorizing the Channels with EZ Scan Add/Delete Channels with Manual ProgramManual Picture Control User option Picture Menu OptionsEZ Video Sound Menu Options Manual Clock Setup Timer Menu OptionsAuto Clock Setup Sleep Timer Setup On/Off Timer SetupFor On timer function only Auto OffClosed Captions Special Menu OptionsKey Lock Caption/TextCaptions Lock Options Set password Lock Menu SetupSetting Lock on/off RS-232C Configurations External Control Device SetupRS-232C Setup Type of Connector D-Sub 9-Pin Male Set ID Command Reference ListCommunication Parameters Transmission / Receiving ProtocolInput Select Commandb Main Picture Input Power On CommandaScreen Mute Commandd Volume Mute CommandeTint Commandj Color CommandiSharpness Commandk OSD Select CommandlIR Codes How to ConnectRemote Control IR Code Code Hexa Function Product Specifications MaintenanceCleaning the Screen Cleaning the CabinetSymptoms Troubleshooting Checklist