Using the remote control
1.Point and aim the top front of the remote
control directly at the display when pressing the buttons.
2.The remote control must be held at an angle within 30 degrees of the display's remote control sensor window to function correctly. The distance between the remote control and the sensors should not exceed 5 meters.
3.Do not cover the sensor window on the front of the display (below the power indicator lamp), or place objects in front of it which will block the direct lineof- sight between the remote control and the sensor window on the display.
• Do not let the remote control become wet,
or place it in humid environments (like bathrooms.)
•If the remote control sensor window on the display is in direct sunlight or strong light, the remote control may not operate properly. In this situation, change the light source or readjust the angle of your display, or operate the remote control from a location closer to the remote control sensor window on the display.
English
Downloaded From
Section 1: Quick Start Guide 9