LG Electronics 55UF6700 Cleaning, Moving, Ventilation, Outdoor Antenna Grounding, Batteries

••Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

••Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

••Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

••Ventilation

Circuit Breaker

Power Supply

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or

ENGLISH

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

••Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

		Antenna Lead in Wire
		Antenna Discharge Unit
Ground Clamp		(NEC Section 810-20)
Electric Service		Grounding Conductor
Equipment		(NEC Section 810-21)
Ground Clamp		Power Service Grounding
		Electrode System
	NEC: National Electrical Code
		(NEC Art 250, Part H)

other materials while plugged. Do not install in excessively dusty places.

••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

••Keep the product away from direct sunlight.

••Never touch this apparatus or antenna during a lightning storm.

••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

••Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

••DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

••Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

••This apparatus uses batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

••Do not dispose of batteries in a fire.

••Do not short circuit, disassemble, or allow the batteries to overheat.

4