Basic Operation

Controls

11. PRxy (Programme Up/Down)

Selects next programme or a menu item.

12. VOLÏq (Volume Up/Down)

Adjusts the sound level.

Adjusts menu settings.

13. OK

Accepts your selection or displays the current mode.

14. Q.VIEW

Returns to the previously viewed programme.

Note : In Teletext mode, The Q.VIEW button is used.

15. TELETEXT buttons

These buttons are used for Teletext.

For further details, see the ‘Teletext’ section.

POWER

1 2 3

4 5 6

7 8 9

* 0 *

PSM SSM I/II

MENUTV/AV

PR
VOL	VOL	11
OK		11

SLEEPTV/PC

TEXT/MIX Q.VIEW LIST

UPDATE TIME REVEAL HOLD

Turning the TV On and Off

Standby Setup: The AC-DC converter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the power button on the front panel of the TV to go into standby mode.

1.If the TV is in standby mode, press the Power button on the remote controller or the TV itself to turn the TV on.

2.Press the Power button again on the remote controller or the TV itself to turn the TV off.

Note : If the TV is on and the power button is pressed to turn the TV off, the TV goes into standby mode.

Programme selection

You can select a Programme number with the PRxy button or NUMBER buttons.

POWER

1 2 3

4 5 6

7 8 9

*	0	*
*		*
PSM	SSM	I/II
MENU		TV/AV
	PR
VOL	OK	VOL
	OK
SLEEP		TV/PC
	PR
TEXT/MIX	Q.VIEW	LIST

UPDATE TIME REVEAL HOLD

Volume adjustment

Press the VOLÏq button to adjust the sound level.

Quick view

Battery installation

uInserting batteries

1.Remove the battery cover by pulling it upward in the direction shown by the arrow.

2.Insert the batteries with correct polarity ( "+" to "+", and "-" to "-" ).

3.Replace the battery compartment cover.

*Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with new batteries.

*Remove batteries when you won't use the remote controller for long time. Liquid leakage from old batteries may cause operation failure.

uNotes for using remote controller

•Make sure there are no objects between the remote controller and its sensor.

•Don't place the remote control near a heater or in damp place. Strong impact to the remote control may cause operation failure.

•Signal from the remote control may be disturbed by sun light or other bright light. In this case, darken the room or move the TV.

Press the Q.VIEW button to view the last channel you were watching.

Sound mute function

Press the MUTE button. The sound is switched off and the

mute display appears.

To cancel mute mode, press the MUTE button again, VOLÏq or SSM button.

On screen menu language selection

The menu can be displayed on the screen in desired		Language
language.		English
First select your language.		Deutsch
1.	Press the MENU button.	Français
2.	Select the Setup menu.	Italiano
		Español
3.	Select the Language menu.

4.	Press the PRxy button to select your desired

	language.	▲▼ ◀▶ MENU TV/AV
5.	Press the TV/AV button.

All the on screen displays will appear in the selected language.