LG Electronics LG 42GA6400, 50GA6400, 47GA7900, 47GA6400, 55GA6400, 60GA6400 Using IR Blaster

ENGLISH

32MAKING CONNECTIONS

Using IR Blaster

Universal remote control setting enables user to control multiple devices with a single remote controller. In order to continue the setting, please check, if IR Blaster and other devices are connected with TV properly.

When set-top box is connected:

1Connect the IR Blaster Cable to the TV. Place the transmitter in front of the Set-top vox.

2Home > All Apps > Settings > Video input > Add device manually.

3Select a device and Next. The TV signal playing is displayed.

4Select your device type.

5Select your lineup provider. (when device type is Cable box, Satellite receiver or DVR)

6Select the manufacturer of the selected device.

Check if the IR Blaster is firmly plugged into the IR Blaster port and is placed near the remote sensor of your device. and Select Next.

7Select Send POWER or Press CH up/down to test the code. If the code is not matched, select No, try next code to find the corresponding code. If the code is matched, select Yes.

8Analyzing channels. Select Next. (when device type is Cable box, Satellite receiver or DVR)

9Select Finish. Your device is registered.

NOTE

yyThe steps may differ depending on connected device.