Normal Operation
–(dash) button Number buttons
| SELECT |
MUTE | FLASHBK |
| PG UP |
| PG DN |
RATIO FREEZE | SURF HELP |
SURF ( 
) button
CH +/– buttons
FLASHBK button
MUTE button
VOL +/– buttons
MUTE | FLASHBK |
PG UP
PG DN
SIGNAL button
AUDIO CC SIGNAL
FREEZE button
RATIO FREEZE SURF HELP
Channel Selection
You can select a channel as shown below.
Number and – (dash) buttons (on the remote control)
Use Number
FLASHBK button (on the remote control)
Press to return to the previous channel you viewed. For example, if the DTV Receiver is tuned to channel 55 and then you change to channel 56, pressing FLASHBK will return to channel 55.
SURF ( 
) button (on the remote control)
Press to scroll through your favorite channels.
CH +/– buttons (on the remote control) or 3 / 4 (on the front panel)
Use CH +/– on the remote control or 3 / 4 on the front panel to cycle the HDTV Receiver through the channels in memory.
Volume Adjustment
Adjusts the volume of analog audio out on HDTV Receiver. You must set Audio Variable to On in the OPTION menu to use the Volume Adjustment. See page 24.
VOL +/– buttons (on the remote control) or 1 / 2 (on the front panel)
Use VOL +/– on the remote control or 1 / 2 on the front panel to adjust the volume for analog audio out on the HDTV Receiver.
MUTE (on the remote control)
Press MUTE to turn off the volume for analog audio out on the HDTV Receiver.
otes
•Before setting Audio Variable to Off, make sure that you have turned down the TV’s volume to the minimum. Otherwise, sudden high volume sound may cause hearing or speaker damage.
•The volume of digital audio out on HDTV Receiver can not be adjusted on the HDTV Receiver front panel.
Signal
Shows the signal strength bar for incoming signal to help you adjust the antenna to the correct position for your location. You can view the signal strength bar by pressing SIGNAL on the remote control.
ip
Refer to www.antennaweb.org for antenna position.
AntennaWeb.org, will help you determine the proper outdoor antenna to use in order to receive television channels that are broadcast locally.
Freeze
Pressing the FREEZE button freezes the current image. Pressing the FREEZE button once again returns the image to live video.
PROGRAM
STATION
ote
The frozen image returns to live video after 5 minutes.
38